Don't take duplication of your brilliance for granted

No question about it. Engineering Project Supervisor Fred Bailik's savvy was second-to-none in the plant engineering department. And that was exactly the problem.

01/01/1998


No question about it. Engineering Project Supervisor Fred Bailik's savvy was second-to-none in the plant engineering department. And that was exactly the problem.

Chief Engineer Milton Fore brought it to Plant Engineer Henry Lowe's attention one day. The evidence was summed up in an Employee Turnover Report distributed by Personnel.

"Take a look at this, Henry," Fore suggested.

The report listed employee resignations and terminations over a 3-yr period, broken down by department, section, and supervisor.

Lowe frowned. He gazed up at Fore. "Bailik?"

Fore nodded. What disturbed the Chief was clear. The number of quits of good people in Bailik's group were at least double those from any other group in the engineering department.

"What do you think?" Fore asked.

"This can't be ignored. Thanks for bringing it to my attention."

The situation called for a bit of investigation, Lowe decided. He selected five of the qualified professionals who had resigned from Bailik's group and picked up the telephone. By the second call, he had an idea of what Bailik's problem might be. By the fifth, he was convinced.

Question: Can you make a guess regarding Lowe's subsequent action?

Lowe's resolution: Lowe summoned Bailik to his office, offered him coffee, and made the visit as casual as possible.

"What's up?" Bailik asked.

"Small problem, which I think you can easily solve."

He showed Bailik the Turnover Report. It was the project leader's turn to frown. "What do you have in mind?"

Lowe smiled. "Nothing drastic. I think the excessive quits you've been experiencing might be nothing more than a case of a bright executive being too smart for his own good."

He told him about the phone calls he had made.

"The response followed a similar line. Dissatisfaction attributed to what I might categorize as communications gaps. First, I know how busy you are. Second, busy people often lose patience with things that take time. Third, bright people sometimes take it for granted that associates possess the same knowledge and understanding they do. Crediting a subordinate with similar savvy and smarts may be a compliment, but it can also be frustrating. In my opinion, it might make sense for you to slow down a bit in training people, giving assignments, and getting feedback to make sure the other guy is on the same wavelength."

Bailik's high brow was furrowed.

Lowe grinned. "It's not all that serious, Fred. But please give it some thought."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me