Domestic machine tool manufacturer facility expansion drives new opportunities

Brian Papke, president of Mazak Corp., talks about how a large expansion to the company's Florence, Ky. facility is driving new opportunities for the company in the U.S.

08/17/2012


Mazak Corp. has announced a large expansion of its Florence, Ky., manufacturing facility to handle the rapid growth in the domestic machine tool business. Brian Papke, president of Mazak Corp., talks about how that growth is driving new opportunities for the company in the U.S.

PE: What have the last three years been like for Mazak? Have you been able to invest in R+D while serving the existing customer base?

Papke: Our incoming orders in 2010 were up 100%, last year up 60% (on a calendar year basis), and this year are up 20% thus far. Also during the past 3 years, we continued to develop new, innovative products, as opposed to simply meeting the increases in demand with existing older machine models.

During the downturn prior to the manufacturing upswing, we continued to reinvest in our factory and in our R+D resources to ensure that we could competitively produce new products that were receptive to the market when the economy was back on track in 2010. Even though business is now good for most manufacturers, they must still strengthen their competitiveness, and doing so requires truly new, innovative, and productive equipment, not technology that’s as much as 5 years old.

And Mazak, like other manufacturers, is under the same pressure, which is why we continually improve our technology and invest in new equipment for our own production-on-demand manufacturing operations to increase our productivity and competitiveness. Our customers, like us, want the latest and greatest technology that will increase their productivity better than anything else on the market and better than what their competitors are using.

A favorable business climate doesn’t imply that a company will automatically be successful. You still have to be competitive or you will lose that success. Our customers are very receptive to the products we develop because they consistently provide more productivity and a competitive advantage.

PE: As IMTS approaches, what are you hearing from your customers about what they need to continue to grow their business?

Papke: As IMTS approaches, our customers are seeking new technology that will give them the competitive advantage and improve their business. Additionally, they are quite concerned with how those products will help reduce the labor content in operations—not in an effort to necessarily reduce labor costs, but instead to improve production without increasing their dependency on skilled labor.

To reduce their reliance on skilled labor, manufacturers are also seeking to automate as many operations or processes as possible. Such automation can take different forms besides the commonly thought-of stand-alone robot. For instance, a multitasking machine combines enough different processing capability that, in itself, automates production because parts are loaded in the machine once and come out completed.

PE: Conversely, what do they say are the barriers to growing their business?

Papke: The biggest barrier to our customers’ abilities to grow is the current lack of skilled labor. Recruiting, training, and maintaining skilled employees on an ongoing basis are proving increasingly challenging for these manufacturers. Therefore, we continue to strengthen our efforts in providing not only highly productive machines and fully automated solutions that will ease the need for skilled labor, but also providing customers with various training programs as part of our Pyramid of Learning and through our regionally located technology centers.

PE: Mazak is a global company. What are the secrets to being both global and local today, and why is that of benefit to manufacturing?

Papke: There is really no big secret, except for the fact that a company has to be committed. Being a successful company on both a global and local level simply takes a strong commitment to being where your customers are and having a well-established presence in those areas.

We are not only a company that sells machine tools, but one that also works closely with its customers to develop complete turnkey manufacturing solutions that provide them the lowest possible cost of ownership and the fastest return on their investment. But equally important, these solutions optimize their operations and increase equipment utilization rates.

In the machine tool business, those who survive, prosper, and grow over long periods of time are the ones that are completely committed to providing innovative technology and unmatched customer support. Ultimately, our desire is to always have our customers tell us that they’ve improved their profitability as a result of investing in Mazak equipment. We want them to grow and prosper, and in the process, we want to grow as partners with them.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me