Does the European market for data center power distribution products have untapped potential?

Data center power distribution in Europe accounts for a very small amount of the $440 million accumulated in 2011. The potential for a growing market exists, but a lack of visibility and investment remains a hurdle.

05/21/2012


With an estimated size of around $50 million in 2011, EMEA’s market for three-phase data center power distribution hardware was smaller even than that of Asia’s developing markets. A new study by IMS Research, recently acquired by IHS Inc., shows that the global data center power distribution market was worth $440 million in 2011; the Europe, the Middle East and Africa (EMEA) market accounted for only 11% of this, with most revenues coming from the Middle East. However, because EMEA’s markets for both data centers and uninterruptable power supplies (UPS) are of similar size to those in the Americas, it is possible that EMEA is merely an untapped potential waiting to become the next $100 million dollar market by 2016 for these types of specialty power distribution products.

The study considered product hardware for the three-phase power distribution market including transformer-based power distribution units (PDU), remote power panels (RPP), static transfer switches (STS), overhead busway, and branch circuit monitoring (BCM). With a high price tag, commanding upwards of $30,000 for just one unit, transformer-based PDUs make up 37% of hardware revenues. As most of EMEA, with the exception of the Middle East, uses 400/230 Vac distribution, the need for the step-down voltage transformation provided by PDUs is unnecessary; this eliminates the potential for upwards of $100 million in revenues from PDUs in EMEA.

“The lack of need for a step-down transformer is just one of the reasons for the difference in size between the American and EMEA markets,” says IMS Research market analyst Lori Lewis. “Instead of using expensive hardware such as PDUs and RPPs, the market has been satisfied by local panel builders using generic equipment to build low cost wall panels.”

Furthermore, limited visibility and product knowledge of the more relevant equipment, such as overhead busway, have delayed significant sales in EMEA. Overhead busway offers the benefits of bringing circuit breakers closer to the loads without consuming floor space while also allowing for much more flexible reconfigurations in the ever-changing data center environment. “Because this product was developed as an alternative to the transformer-based PDU, most manufacturers of overhead busways and their installed user base are in the US. Therefore, the market for overhead busway has yet to establish itself in EMEA,” explains Lewis. “Should more companies begin to showcase busway products in EMEA data centers, the more likely these products will catch on in the region.”

Universal Electric has been selling its Starline track busway product into European data centers through European resellers for a few years now. More recently, Power Distribution, Inc. signed an international licensing deal with UK-based Mardix to sell PDI’s overhead busway line in EMEA. Such expanded marketing is what is needed to bring three-phase power distribution products into EMEA data centers and create product awareness in equipment such as branch circuit monitoring and overhead busway. “We feel that there is a market for these products in EMEA, but until more suppliers begin exploring these opportunities for growth, it is likely to take longer than five years before EMEA hits the $100 million dollar mark.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me