Does discrimination -- like life -- begin at 40?

Under the Age Discrimination in Employment Act (ADEA), age 40 is the threshold at which protection begins.

10/01/1999


Under the Age Discrimination in Employment Act (ADEA), age 40 is the threshold at which protection begins. With this thought in mind, Maintenance Supervisor Frank Gray, 31, formulated his plan to get rid of Electrician Grade I Tom Lucas, 59, and replace him with a younger, more energetic man.

It was no secret in the department that Gray, who was brought in to replace the recently retired department head, wanted to "recharge the operation" with younger employees. But Gray was savvy enough to know that under ADEA you can't simply fire a worker because of his age. Hence the ambitious supervisor developed a plan to rejuvenate the department, make it more productive, and thus advance his career.

His plan was simple enough. Lucas' performance record, though marginal, was within acceptable bounds. Gray suspected if he fired the electrician and replaced him with a younger man he would be subject to charges of age discrimination. But not if his replacement exceeded the ADEA guideline. With this idea in mind, Lucas fired Gray and hired Philip Stone, age 41, in his place. This, he reasoned, should get him off the ADEA hook.

It didn't. Lucas protested the firing, claiming as Gray expected he would, that he was terminated because of his age in violation of the law.

"No way!" Gray countered. "If I were guilty of age discrimination would I have hired a guy over 40 to replace you?"

Lucas refused to settle for this explanation. When he threatened to sue, Gray took his case to his boss.

Question: Can Gray make the dismissal stand up?

Marshall's verdict: Gray's preference for younger employees was not unknown to Plant Engineer Steve Marshall. Reviewing Lucas' employment record, he asked Gray, "It seems obvious to me that you want to get rid of this man because of his age. I don't have to tell you age discrimination is illegal."

"I realize that," Gray replied. "But under ADEA the designated threshold is 40. Since I replaced Lucas with a 41-yr-old applicant, how can I be accused of age discrimination?"

"Simply enough," Marshall said. "I'll concede that replacing Lucas with a man in his 20s or 30s might make the age discrimination more obvious. But from a moral, and perhaps even legal standpoint, given Lucas' acceptable performance record, and with 41 being substantially younger than 59, I suspect any judge worth his salt would see through your motivation. My advice for the future is that if you plan to fire anyone, confine your decision to performance based factors alone."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me