Dock slowdown has impact on sliding PMI

Despite settlement, the monthly PMI index drops to 12-month low at 52.9%.

03/02/2015


The announced settlement of the West Coast dock workers slowdown came a little too late to boost the Institute for Supply Management's (ISM) monthly PMI Index in February.

The dock slowdown on the West Coast got most of the blame as the PMI fell from 53.5% in January to 52.9% in February. The February PMI was the index's lowest level in more than a year and marked the fourth straight month of decline, but it still was solidly above the growth line of 50%, where it has been for the past 26 months.

"Comments from the panel express a growing level of concern over the West Coast dock slowdown, negatively impacting exports and imports and requiring workarounds and added costs," said Bradley J. Holcomb, chairman of the Institute for Supply Management's Manufacturing Business Survey Committee, which produces the monthly index.

The dock slowdown on the West Coast got most of the blame as the PMI Index fell from 53.5% in January to 52.9% in February. Courtesy: Institute for Supply ManagementA deal between dock workers and interests for shipping companies and terminal operators was announced on February 21. The deal ends a nine-month slowdown at West Coast ports. While normal dock work now will resume, a massive backlog of goods still sits on inbound and outbound ships.

Committee members were especially aware of the impact of the slowdown in their monthly comments. Committee members in the food and beverage, transportation equipment, computers and electronics and machinery sectors all cited the dock slowdown as a significant factor.

"West Coast port congestion and work slowdowns by the union is hurting our imports and exports, (and) getting worse by the week," said one manufacturer.

That issue aside, however, the general tone for manufacturing was again solid. "One manufacturer said the sector is "improving, and 2015 is off to a good start."

The February PMI corresponds to an annual 3.1% increase in gross domestic product. The index continues to average more than 10% higher than its break-even point, at 55.7% over the past 12 months.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me