Disability discrimination: Is supervisor liable?

The Americans with Disabilities Act (ADA) protects disabled employees from discrimination in the workplace.

11/01/1998


The Americans with Disabilities Act (ADA) protects disabled employees from discrimination in the workplace. It also requires employers to provide accommodation for "qualified individuals" unless that accommodation imposes an undue hardship on the employer.

Instrument Repairman Louis Lustig, who Maintenance Foreman Murray Coleman regarded as a "so-so employee," had developed a macro degeneration problem and was categorized as "industrially blind." When Coleman decided to fire Lustig as "no longer able to perform his duties efficiently," the repairman protested on the grounds that his performance was as efficient and competent as the other two members of his group. He claimed to have evidence to prove his contention, and also said it would help if lighting improvements were installed.

"Sorry," Coleman replied. "The decision has already been made."

Lustig accused the foreman of bias under the ADA. Coleman insisted no such bias was involved. "It's my responsibility to run the operation in a way I regard as efficient and productive."

"You've always had a grudge against me," Lustig persisted. He threatened to sue the foreman personally if he didn't rescind the termination.

Question : Assuming discrimination can be proven, is Coleman personally liable?

Talbot's verdict: Plant Engineer Phil Talbot assured Coleman that the ADA does not impose individual liability on supervisors. But he added, "If you insist on firing Lustig, you'd better make damn sure of your facts. I would advise you to check his claim that he has evidence to prove he's as efficient and competent as coworkers in the same job. And double check the lighting situation in his area. Firing a disabled person is justifiable only as a last ditch resort where his poor performance is irremediable, and such as to endanger the operation or cause irreparable harm."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me