Developing the next generation of workers

There are several persistent myths about manufacturing that simply don't do justice to a sector that remains the backbone of the US economy.

03/14/2012


[The 2012 Forecast issue of] Plant Engineering highlighted readers' understandable concerns about developing a future workforce to fill critical jobs in industry and manufacturing. This issue is at the center of Siemens own vision as we develop strategies to meet the increasingly complex needs of customers in 197 countries representing all major industries.

Our workforce of 360,000 is diverse and growing, especially in the U.S.. Indeed, contrary to headlines about a "jobless recovery," the challenge we face at our more than 100 plants across America is finding qualified talent to fill 1,800 current U.S. job openings.

There are several persistent myths about manufacturing that simply don't do justice to a sector that remains the backbone of the US economy.

Myth 1: Nothing is made in America anymore and U.S. manufacturing is dead.

Fact: The U.S. is still the world's largest manufacturing economy, producing $1.6 trillion of goods each year, or 21% of global production. Manufacturing is a great place to look for a job right now. Deloitte recently estimated that there are as many as 600,000 manufacturing jobs that are unfilled in the U.S. due to talent shortage. (Source: "U.S. manufacturing sees shortage of skilled factory workers." Washington Post, Feb. 19, 2012.)

Myth 2: US manufacturing jobs are unskilled, low-paid jobs.

Fact: Over the next decade, the most needed jobs in industry will require at least some post-secondary education, according to the National Association of Manufacturers. These jobs include managers, who earn an average annual wage of $107,970 and industrial engineers, who earn $75,740. (Source: "How to train U.S. workers back into manufacturing jobs," Fortune, June 29, 2011.)

Myth 3: Automation is a job killer.

Fact: Automation increases productivity, competitiveness, and jobs. Research going back to the late 1920s shows that productivity growth and jobs growth usually happen at the same time. Productivity levels are at record highs now but there’s more room for improvement especially as we think about all of the pressures that industry faces. (Source: “Productivity and Growth: The Enduring Connection,” McKinsey Quarterly, Feb. 2011.)

Manufacturing is vital, vibrant and growing in the U.S.. Our biggest challenge is fueling interest and competencies to fill critical manufacturing jobs. That's why Siemens is focused on competitive workforce development programs for engineering grads, on-the-job training programs like the one experienced by Jackie Bray, whom President Obama highlighted in his State of the Union speech, and recruiting campaigns to take advantage of the rich skills offered by America's ex-military.

At the K-12 level, Siemens is also a national sponsor of programs like FIRST, which introduces students to technology through robotics championships held all over the world. Siemens engineers mentor teams at the elementary, middle and high school level to introduce them to engineering and build an early talent pipeline. We're not alone. Smart companies, including our competitors, have discovered the power of partnering with FIRST to drive brand recognition among future job seekers, strengthen ties to the community and even leverage FIRST mentoring as a management training program for existing employees.

For anyone in industry, supporting STEM programs like FIRST at the community level is the best way to grow the next generation of talent to fill our critical engineering jobs of the coming decades.


Raj Batra, President, Industry Automation Division, Siemens Industry Inc.

Batra to address automation and manufacturing summit at September IANA event

Raj Batra of Siemens Industry Inc. will be among the presenters at the 2012 Industrial Automation North America (IANA) Global Automation and Manufacturing Summit during the International Manufacturing Technology Show (IMTS) 2012 Conference Sept. 10-15, 2012 in Chicago. The Summit is presented by Hannover Messe, which is producing the IANA Show, and CFE Media, which includes Plant Engineering and Control Engineering magazines.

Below is the schedule for the two-day Summit:

    Wednesday, Sept. 12, 2012
    8:00 a.m.: Keynote address
    9:30 a.m.: Treating Energy as a Raw Material
    11:00 a.m.: Integrating Operator Knowledge
    12:30 p.m.: Lunch and keynote presentation
    2:00 p.m.: Stay Ahead of the Technology Curve
    3:30 p.m.: Gaining, Training, Retaining the Next Generation of Workers

    Thursday, Sept. 13, 2012
    8:00 a.m.: Keynote address
    9:30 a.m.: Empowering the Mobile Worker
    11:00 a.m.: Securing Your Data

To register for the 2012 IANA event and the IMTS 2012, go to http://www.imts.com/education/ianaSummit.html



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me