Developing community rapport opens a door to the future

A recent study from the Commerce Department’s Bureau of Economic Analysis has put a number on the value of research and development as a driver for economic growth. It seems that R&D is contributing about 7% of the economic growth in the past seven years when it is considered as a capital investment, like a new piece of equipment, rather than as an expense, such as the salaries paid t...

11/01/2006


A recent study from the Commerce Department’s Bureau of Economic Analysis has put a number on the value of research and development as a driver for economic growth. It seems that R&D is contributing about 7% of the economic growth in the past seven years when it is considered as a capital investment, like a new piece of equipment, rather than as an expense, such as the salaries paid to the R&D staff.

It’s an interesting concept, this idea of measuring R&D as an investment rather than as a revenue drain. It means we have to start treating the guys in the white lab coats and pocket protectors with a little more respect.

While there has been much debate in Washington over some foreign governments’ failure to regulate intellectual property theft, an equally pointed (and just as important) debate is simmering over whether anyone in the U.S. will create any intellectual property worth stealing.

A recent study by R&D magazine and the Battelle Memorial Institute found that while the U.S. continues to lead the world in research and development, China gained 2.1% of the world R&D market share. The U.S. and Europe slipped almost 1% each.

China’s emphasis on math and science education is seen as a major driver for this increase. The study’s author told the Wall Street Journal that the solution to that problem is pretty simple %%MDASSML%% drive more R&D research in U.S. industry, and make math and science education a priority for U.S. schools.

That seems to be happening at most major American universities devoted to such pursuits. The U.S. Patent and Trademark Office keeps track of such things, and the top 13 universities generated almost 1,300 patents in 2005, about the same as in 2004. For the 12th straight year, the University of California leads the way, and other major players in the space are the kinds of schools you’d expect to see: CalTech, MIT, Stanford, Johns Hopkins, Michigan and Texas.

Still, we can’t wait until college to encourage creative thinking among our young people, and we shouldn’t wait for the government to drive the program. We need to show high school students, and even elementary school students what manufacturing is really all about.

Perhaps it’s something as simple as a good old-fashioned open house in your own manufacturing facility. It’s important the young people in your own community get a chance to see what you do and why it’s important %%MDASSML%% and maybe why it’s a cool job for a high school kid to want to pursue.

Locked behind the factory door, manufacturing seems imposing. You know that’s not the case. Throwing open those doors gives your community a look at what manufacturing is really all about, and that may help inspire the next generation of manufacturers.

It’s the kind of intellectual property worth sharing.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me