Deutsche Messe to add power transmission show at IMTS in 2014

MDA North America to build on success of IANA debut in 2012

01/25/2013


Deutsche Messe AG will expand its presence at the 2014 IMTS Show by adding the MDA North America on Sept. 8-12, 2014. MDA North America will focus on mechanical power transmission and control, as well as pneumatics and hydraulics. Courtesy: Hannover MesseAfter a successful debut with its Industrial Automation North America pavilion at IMTS 2012, Deutsche Messe AG will expand its presence at IMTS 2014 by adding the MDA North America on Sept. 8-12, 2014. MDA North America will focus on mechanical power transmission and control, as well as pneumatics and hydraulics.

The IANA pavilion at IMTS, co-sponsored by CFE Media, was the first North American trade event for Deutsche Messe, the world’s largest industrial trade show organization. “The success of Industrial Automation North America showed that the core competence from the Hannover Messe portfolio perfectly complements the machine tools fair IMTS,” said Dr. Andreas Gruchow, member of the managing board at Deutsche Messe AG. “Nothing demonstrates our commitment to developing our activities in North America better than MDA North America, which will serve as a perfect platform for exhibitors from power transmission and control technology on one of the biggest markets in this sector.”

Deutsche Messe officials noted that Germany is the American market’s leading supplier of products in the power transmission and control technology sector. More than one fifth of total exports of power transmission and fluid technology to the U.S., worth € 9.5 billion, came from Germany, with Japan (18.2%) and China (14.1%) right behind.

“In absolute terms, the value of exports to the USA in this sector in 2011 was more than double the figure for 2001. In fact, following the economic shock of 2009, business had already rallied sufficiently in 2010 to have reached the same level as in 2008, before the crisis,” said Hartmut Rauen, senior executive of the German Engineering Federation (VDMA) and head of the VDMA’s power transmission and fluid power divisions. “The figures for 2012 suggest further growth—which is why we welcome MDA North America as an additional platform for our successful overseas business.” 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me