Delivering warehouse productivity

Optimizing a warehouse depends on finding the right solution tailored to a company's individual material handling needs.

12/14/2011


Photo courtesy: Raymond Handling SolutionsThere are various solutions that contribute to efficient and productive warehouses. Often, optimizing a warehouse depends on finding the right solution tailored to a company’s individual material handling needs. The following are examples of warehouses that optimized their businesses in a variety of ways through enhancing material handling applications.

Upgrading equipment translates to efficiency

The new director of operations at a mattress and furniture retailer wanted to reduce maintenance costs on his fleet of lift trucks. At the time, his fleet was composed of 10 24-V, rail-guided orderpickers. In search of replacements for his aging, inefficient fleet, the retailer asked to demo a highly productive, 36-V ac-powered orderpicker. In a head-to-head time trial, the retailer tested the more expensive 36-V ac-powered lift truck against a new, lower cost, 24-V dc-powered truck. The test involved traveling down an aisle, raising and picking a king-sized mattress, then returning. 

In the test, the 24-V dc truck completed the task in 1 min 45 sec, whereas the 36-V ac-powered truck completed the task in less than 1 min.

Based on this data, the retailer was able to justify the higher capital investment in the 36-V ac-powered orderpicker and purchased three rail-guided units to replace seven of its oldest dc pickers. The retailer then went on to focus on optimizing labor and maintenance costs.

Three years later, the retailer estimates that by focusing on reducing labor and maintenance costs—rather than trying to reduce the initial upfront capital investment—his company has saved more than $300,000 each year.

Alternative solutions generate cost savings

A large 3PL reevaluated its practice of using propane-powered sit-down lift trucks to load trailers on the dock. With the rising costs of fuel and labor, the company sought to find cost-saving ideas for loading its pallets and considered electric lift trucks.

By using triple-length electric pallet trucks to load three pallets at a time, the company discovered it could load a trailer in one-third of the time it normally would take when using a sit-down lift truck. The company quickly discovered other benefits, such as:

  • Lower capital investment for the material handling equipment
  • Lower energy costs by using electricity instead of propane (roughly 90% savings)
  • Lower labor costs by loading a trailer in less time
  • Faster turnaround time for pick-ups at the dock: one-third less time loading translated into three times more shipping appointments.

Fast-charging solutions provide space savings

A large snack manufacturer landed a sizable commitment from a mega-retailer that anticipated a 40% sales growth each year. To accommodate the increase in production, the snack manufacturer quickly realized it needed to improve its warehouse on various levels.

The company knew it wanted to upgrade its current lift truck fleet to electric stand-up counterbalanced trucks. It also wanted to reduce repair costs and downtime that it experienced with its original fleet. The operations manager created a plan to implement a fleet of 13 electric lift trucks, including stand-up counterbalanced trucks, reach trucks and orderpickers, plus two batteries per lift truck, one charger and a battery changing system.

The company did not have the means to invest in a large battery area, so it found a comparable solution. By monitoring the battery usage through electronic monitors, the operations manager and his team were able to create an alternative charging strategy that involved high-frequency fast chargers, remote monitoring of when lift trucks were being charged, and an intensive battery watering program.

Four years later, the program is a success and the snack company continues to grow without having to give up valuable manufacturing space for a battery room.

Efficient lighting illuminates narrow aisles

A leading international supplier of active wear for the apparel industry was looking for ways to increase orderpicking productivity and accuracy within its very-narrow-aisle warehouse. At the same time, a renewed focus was placed on reducing its operating costs. By working closely with its material handling representative, the supplier quickly became aware of various new technologies in warehouse lighting.

Operating in aisles as narrow as 54 in. with storage racks standing as tall as 30 ft, light distribution within the aisles often created a challenging operating environment, impacting order-picking accuracy. In addition, the old 450-W metal halide light fixtures were costing the company thousands of dollars per month in unnecessary electrical costs. 

Today, with a lighting plan that complements its storage rack layout and the replacement of its old fixtures with new high-efficiency fixtures, equipped with occupancy sensors, this industry leader is operating much more efficiently than before and cutting energy costs by about 45%. 

Fleet management software optimizes warehouses

A major international provider of pharmaceuticals and healthcare products found itself searching for ways to control operating costs and reduce equipment-related damage. Recognizing it might benefit from lift truck fleet management software, the company decided to incorporate a system into its facility. The following key benefits had a dramatic impact on the company’s operations:

  • Secure access to material handling equipment only by authorized personnel
  • Regulatory and safety compliance through electronic OSHA preshift safety inspections
  • Best practices implemented by monitoring equipment impacts, utilization, and productivity
  • Cost control through reduction in damage and proactive, on-time maintenance
  • Since incorporating a fleet management system, the company has noted a reduction in lift truck impacts, reducing costs related to subsequent damage.

Walker is director of sales for Raymond Handling Solutions.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me