Data breaches go undisclosed

Malware striking systems may be more prevalent than suspected as 57% of malware analysts working on enterprise-related data breaches have addressed security problems that U.S. firms failed to disclose, a new survey said.

12/02/2013


Malware striking systems may be more prevalent than suspected as 57% of malware analysts working on enterprise-related data breaches have addressed security problems that U.S. firms failed to disclose, a new survey said.

Perhaps in a move to save reputations or avoid difficult questions by customers and investors, this could mean data breaches are more widespread than first believed, and businesses are even further behind than thought in the fight against cyber attackers, according to the ThreatTrack survey.

Security vulnerabilities and cyber attacks have become critical problems for companies worldwide. If breached, a company network could become a treasure trove for hackers, potentially full of customer details—including telephone numbers, addresses and card information—sensitive corporate data, or information which impacts national infrastructure security. A number of high-profile breaches have taken place this year, including LivingSocial, Evernote and the Federal Reserve.

Verizon’s 2013 Data Breach Investigations Report said there were 621 data breaches in 2012. However, if considered in tandem with ThreatTrack’s data which says 66% of malware analysts working with 500+ employee enterprises have dealt with undisclosed security problems, the confirmed 621 attack number may be significantly under-reported.

The independent blind survey of 200 security professionals within U.S. companies was conducted by Opinion Matters on behalf of the security company in October this year.

“While it is discouraging that so many malware analysts are aware of data breaches that enterprises have not disclosed, it is no surprise that the breaches are occurring,” said ThreatTrack Chief Executive Julian Waits. “Every day, malware becomes more sophisticated, and U.S. enterprises are constantly targeted for cyber espionage campaigns from overseas competitors and foreign governments. This study reveals that malware analysts are acutely aware of the threats they face, and while many of them report progress in their ability to combat cyber-attacks, they also point out deficiencies in resources and tools.”

Forty percent of respondents said one of the most difficult aspects of their roles was the fact skilled help is in short supply.

When asked to identify the most difficult aspects of defending their companies’ networks, 67% said the complexity of modern malware is a crucial factor, 67% said the frequency of attacks is a problem, and 58% cited the ineffectiveness of market solutions as an issue.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me