Daily Insight for July 9, 2012:

Daily Insight: Airbus in Alabama and what ‘Made In America” means

07/09/2012


Our new venture: Each weekday, Daily Insight will offer some news, some views and some information about what’s happening in U.S. manufacturing, and around the world. With manufacturing finally getting the attention it deserves, you need to know what’s happening around you to make good business decision.

Comments, items of interest and suggestions always are welcome. You can reach me at bvavra@cfemedia.com.

Airbus to Alabama: Is it now AirBama? The announcement this week that Airbus will build a new manufacturing plant in Mobile, Alabama is a further indication that foreign investors remain bullish on the American manufacturing market. The $600 million plant will allow the European-based Airbus to build planes in the U.S. for commercial and military functions. Airbus lost a controversial military deal to Boeing a year ago because of the furor over “made-in-America” and this deal may be strategically designed to defuse that issue.

It also is a further example of how the Mid-South and Deep South are moving the center of manufacturing. The combination of a soft dollar, less expensive labor and land, and generous tax incentives – al.com reports this deal includes $158 million in incentives for Airbus have attracted a number of manufacturers to the region. That attraction shows no signs of weakening any time soon.

Another example of this trend is the continuing growth of the auto industry in the South. Nissan’s Canton, Tenn. plant, for example, is adding a third shift and 1,000 jobs this year, according to RanklinLedger.com.

The motivation is simple: Nissan wants to increase its market share in the U.S. and increase its percentage of U.S. sales from North American-made cars to 85%. RanklinLedger.com reports it’s now at 69%.

So what’s “Made-In-America”? Our single biggest issue to overcome is this outdated notion of “Made In America” and its actual value to manufacturing. Nissan is made in America. So is Toyota, VW, BMW, Kia and Hyundia. Airbus soon will join that group.

If Caterpillar builds a plant in China to manufacture massive earth movers that would cost a fortune to ship and transport, is that any different than Nissan building in Tennessee? The idea is that we’re in a global manufacturing environment. More and more, products are being built closer to their end user. It’s not being done due to patriotism or nationalism. It’s because it’s a smart business decision.

BRIEF INSIGHTS

Patent suit settled: Inpro-Seal issued a press releases this week announcing that a federal judge in Illinois has ruled the company’s Current Diverter Ring does not violate a patent held by Illinois Tool Works. After Judge James Zagel ruled last September on the scope of the protection that the ITW patent covered, ITW sincde acknowledged the scope of that ruling meant the Inpro-Seal product did not infringe on their patent.

“We are gratified that the court has re-affirmed our position on this case,” said Mark Lee, vice president and general manager of Inpro/Seal. “Inpro/Seal has always maintained the utmost respect for intellectual property and patent protection. This judgment allows Inpro/Seal to get back to the business of serving customers.”

Lab simulator at Auburn: A partnership between FFD, Inc., and Auburn University’s Industrial Engineering Manufacturing Laboratory will provide a networked installation of FFD’s Sequence Enterprise Software allowing students to author, manage and deploy standardized automotive assembly work.

 “The goal of the lab is to create a fully integrated, high volume manufacturing environment that incorporates the best practices found in top Lean production systems, said Laboratory Director Tom Devall. “Our hands-on teaching modules provide the experiential learning that our students need to set them apart from the competition after graduation.”

“We are very excited to be a part of this great new facility,” says FFD President and CEO Barry Lucas. “This one-of-a-kind laboratory is the closest simulation I’ve seen to a real automotive assembly.”

“Standardized work is the foundation of a Lean practice,” Duvall adds. “We need world class software that provides the infrastructure to create benchmark standardized work. Sequence meets this need.”

Manufacturing also needs more university-manufacturing partnerships. If you participate in one, let us know.

Celebrate our Leaders Under 40: The deadline is August 1 for the 2012 Leaders Under 40 recognition by Plant Engineering. If you or someone you work with is 40 years or younger and making a significant contribution, submit the information at this link: http://www.plantengineering.com/events-and-awards/leaders-under-40.html

The honorees will be featured in the September issue of Plant Engineering.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me