CSIA seeks greater connection with end user community

Organization charts new goals at Executive Conference

04/27/2011


System integrators are the experts who connect automation and control systems throughout a manufacturing facility. Now the system integration association is ready to make a connected between those integrators and the people they serve.

The Control System Integrators Association laid out its goal of creating greater outreach to end users at the plant floor level during its 2011 CSIA Executive Conference in Orlando last week. The goal will be achieved by delivering more information to the end user community and by increasing certification and educating end users and members about its importance.

Bob Lowe, the CSIA’s first full-time executive director and a former system integrator himself, cited several areas where the association needed to make progress in the near term:

  • Marketing to the end users. “Our partners the value of CSIA and how CSIA can help end users understand the importance of CSIA membership.”
  • End users don’t know CSIA even exists. “This is something identified in our marketing study. What need to do is get articles, and we need your help in doing that.” Lowe said that CSIA need to deliver valuable content to the end user community. In a major step toward accomplishing this, CSIA has a content partnership with CFE Media, which publishes Plant Engineering and Control Engineering magazine.
  • Some end users don’t understand what a system integrator is. “Maybe we’re too close to situation,” said Lowe. “Maybe we need to go back to automation and controls 101.”
  • What’s important to our customers? Why do they value CSIA certification? They want to seek more input from the user community. “As an association, we don’t have direct access to end users. Can we count on your help?”

CSIA has seen membership rise steadily in the past few years, climbing almost 10% from 2009 to 2011. While certified members have fallen slightly in the same period, most of that was attributed to mergers in the market.

Outgoing CSIA board chairman Ed Diehl said the association has the goal of increasing membership to more than 600 by 2015 while increasing the number of certified members to 150 and growing international membership in the same time period. Diehl is being succeeded by Steve Goldberg for a three-year term as CSIA board president.

The association has five immediate goals in its efforts to market to the end user audience:

  • Raise online profile
  • Expand media relationships
  • Forge partnerships with other associations
  • Provide more tools to certified firms
  • Increase membership/certification.

www.controlsys.org

Control System Integrators Association



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me