Costs mount for CA nuke outage

The prolonged outage at the San Onofre plant has cost $317 million, or more than $1 million per day. Power to replace the lost output will cost another $221 million.

12/11/2012


ISS SourceThe cost for the prolonged outage at the damaged San Onofre nuclear power plant in California is coming in at just over $1 million a day topping off so far at $317 million for the year, said the plant’s primary owner, utility Southern California Edison (SCE).

Inspection and repairs of giant steam generators inside the two-unit nuclear plant, which has been offline since January after they found a radiation leak, have cost the utility $96 million, said officials of SCE’s parent, Edison International.

Power to replace lost output from the 2,150-megawatt plant has cost an additional $221 million, SCE officials said.

Last month, SCE submitted a plan to the Nuclear Regulatory Commission (NRC) to restart San Onofre Unit 2 and operate it at 70 percent of capacity for an initial 5-month period, at which point it would halt production and look for signs of the premature tube-to-tube wear that led to the January leak in Unit 3.

It remains unclear if and when the regulator might allow SCE to move forward with its plan or whether the plant would ever come back online fully, said Edison Chief Executive Ted Craver.

“It’s not clear at this time whether the units can be repaired, and it appears complete replacement of the steam generators would take some years,” Craver said.

In an attempt to recoup some costs related to San Onofre, SCE in September submitted a $45 million invoice to Japan’s Mitsubishi Heavy Industries Ltd, which manufactured the steam generators.

SCE has a 20-year warranty with Mitsubishi for the steam generators, and officials said they plan to send additional invoices to the company.

Last month, the company also submitted an initial claim to Nuclear Electric Insurance Ltd, an industry-sponsored fund, for loss recovery under its outage insurance.

“We will remain diligent in recovering costs incurred from the outage from warranties and insurance,” Craver said.

Still, officials said there was no guarantee the utility would recover money from either the warranty or the insurance company.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me