Coping with the nay-sayer

A negative attitude can defeat achievement and progress. A.P. Gouthey wrote: "You can't have darkness and light in the same place at the same time. The cure for a gloomy outlook is a lighted mind.

08/01/1998


A negative attitude can defeat achievement and progress.

A.P. Gouthey wrote: "You can't have darkness and light in the same place at the same time. The cure for a gloomy outlook is a lighted mind."

Unlike Senior Engineer Brad Phillips, Project Supervisor Bill Weiner was an advocate of meaningful change. Thus he was bugged by Brad's habit of mindlessly denigrating almost every idea proposed at the department's weekly brainstorming sessions. His negative outlook and it-won't-work attitude rubbed off on the rest of the team, dampening spirit, undermining morale.

Weiner was impelled to do something about it. As an optimist he believed that while attitude is a predisposition to behavior, it isn't an absolute. People, even people like Brad, can be persuaded to alter both their outlook and resulting behavior. But how?

Maybe his boss would have some ideas.

Question : What strategy would you use to convert a nay-sayer to a yea-sayer?

Klein's approach: Plant Engineer Rod Klein listened thoughtfully while Weiner expressed his concern.

"You mean he knocks down every suggestion at those brainstorming sessions?"

"Almost every one -- except his own. Like his development idea for a refrigerant management plan. He's all gung-ho for that."

Weiner then cited examples of Phillips' ill considered opposition.

"Interesting," Klein said. "Send him to my office; I'll have a chat with him."

Minutes later, dour-faced Brad Phillips sat across from Klein at his desk.

"Brad, I understand you'd like to get a go-ahead on that refrigerant plan you worked up."

Phillips' face lit up. "Yeah, I think -- "

"Let me ask you this. How would you feel if the idea was killed because a colleague, without even thinking it through, sounded off against it?"

Phillips frowned. "I'm not sure I know what you mean."

"I'll spell it out."

Klein cited an example of Phillips' negativism that Weiner had related. "Tell me, Brad, how closely did you examine and evaluate Ed Horlick's control primer suggestion before declaring it wouldn't work?"

"Well..." His frown deepened. "You mean I -- ?"

Klein smiled. "I think you get the message. Give it some thought. If you want people to respond positively to your ideas, you have to give theirs a fighting chance to succeed -- unless you have a valid reason to do otherwise."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me