Connected watch tightening links to the phone

A number of companies are looking to create a watch with Bluetooth capabilities, but with it comes a variety of challenges like battery life and reliability.

05/14/2012


To start off with a bit of honesty, when Apple first released the iPad back in 2010 I’ll admit, I was thoroughly unimpressed and, outside of business trips, I still lack any real impetus to part with hard earned cash. I had a similar sentiment when I first heard about the Bluetooth enabled watch.

Having spoken to a number of watch manufacturers, there are different outlooks as to what level of functionality such a watch should provide. Whilst some see Bluetooth as a means to enable a basic task, such as providing time zone updates from the handset, others see the watch as a user friendly interface to access a range of other functions from the smartphone. The range of technologies that some are purporting they will include in the watch in addition to Bluetooth is impressive, including Wi-Fi, GPS and NFC as well as touch screen operation.

Just including Bluetooth will allow the wearer to keep their smartphone in their pocket whilst accessing numerous functions. These include, viewing caller IDs and text messages, social media interaction, feedback from fitness devices i.e. heart rate, as well as controlling music and receiving updates on local weather conditions.

The first Bluetooth watch was released by Citizen in 2006, since then many other companies have also begun to address the connected watch market. At the forefront are not only watch developers such as Casio and Meta Watch (formerly a part of Fossil), but also handset manufacturers i.e. Sony (formerly Sony Ericsson) and the startup Pebble, which has received over $10 million in fundraising.

With so many applications available on the watch, there are natural concerns over how long the watches battery will last. After all, having these new toys available is great, but the experience would be very much tarnished if the user was left high and dry with a dead battery, just a couple of days from the last charge. Whilst the introduction of Bluetooth low energy is expected to help with energy savings, this may not be the answer in itself for those watches using multiple functions or with touch screen displays.

As well as overcoming battery problems, manufacturers also have to work out how to get these products to the customer. Watches are essentially seen as a piece of jewelry, rather than a timepiece, with jewelry stores the main vehicle for distribution to the consumer. However, many connected watches have more in common with consumer electronics than a traditional watch and would look out of place in such a shop. Whilst the ubiquity of e-commerce will help, manufacturers must still find a means to enable the consumer to get their hands on the product and experiment with the various use cases.

These products have still got a long way to go to come close to the success of another wearable device – the Bluetooth headset – and over the next five years IMS Research, recently acquired by IHS Inc., expects to see a few tens of millions of units shipped. However, as with the Bluetooth headset, and even more so the now hugely successful tablet PC, the consumer electronics market is one driven by trends and fashion, and with the influence currently held by Apple, the release of an iWatch could make the connected watch the next must-have wearable technology.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me