Confronting the elephant in the room

The manufacturing revolution is gaining momentum and true believers, and holds the potential to deliver significant economic improvement for manufacturing everywhere, if we allow it to.

04/18/2017


Bob Vavra, content manager, Plant Engineering. Courtesy: CFE MediaAt some point, manufacturing must confront the elephant in the room. It's both a symbolic elephant in terms of the political party it represents, and a literal one, because one of the reasons the elephant is in the room is because someone wasn't watching the door carefully enough. The goal now is to get the elephant out of the room before it does any significant damage.

Our manufacturing revolution is gaining momentum and true believers, and holds the potential to deliver significant economic improvement for manufacturing everywhere. That is running smack into the increasing manufacturing nationalism demonstrated by the current U.S. administration. The two are incompatible; while 'America First' makes a dandy slogan, it's a lousy economic policy, especially when it's conducted at 140 characters.

As the world will see when Hannover Messe opens again this month in Germany, the business of manufacturing is not confined to any nation's borders. It is a global, interconnected and interdependent ecosystem. It requires the ability to speak a common language—the language of productivity.

Global suppliers and global manufacturers and global networks are creating a truly new way to measure and manage productivity. The Industrial Internet of Things (IIoT) offers tremendous potential, and almost all of the 200,000-plus attendees at Hannover Messe this month will be looking to unlock all that potential. What every speaker who talks on this subject says is that IIoT will break down the walls separating departments and manufacturing sites.

And yet we see one world "leader" (apparently air quotes are the new way to avoid meaning what you say) talking about building walls, about taxing imports and inhibiting global manufacturing. This comes just one year after President Obama stood in the hallways of Hannover Messe and championed a global manufacturing economy. The United States would justifiably lead, but that also required trading partners committed to finding fair and free trade around the world.

As Obama said at the time, "During my time in office, we've boosted U.S. exports to Germany, and we've increased our bilateral trade by nearly 40% to a record $235 billion last year. German investment in the United States now supports more than 600,000 American jobs. And you're selling more of your products to America as well. Last year, for the first time in decades, the United States became the top market for exports of German goods. So we need to build on this success. I want us doing even more business together, more trade, and creating more jobs for our people."

The message today is very different. We've talked not only of building walls, but of pulling up drawbridges and restricting the movement of people and products. None of this builds our economy or grows our employment opportunity. It limits our trading partners to 50 states and our economic growth to the edges of our oceans.

There's no sense that this stance will grow jobs or improve the prospects for global manufacturing, and it sticks a dagger in the heart of the potential that IIoT has been promising for the last few years. It is snake oil, sold by a snake oil salesman whose own policies apparently don't extend to the manufacture of a line of men's clothing in Asia.

We should do better on regulations and policies that restrict businesses. There's much to be done around creating a better tax environment for small and large businesses. Just a reasonable reduction in regulation and a fairer tax law could create a windfall for manufacturing owners and do so without limiting any decisions they'd want to make about where they want and need to manufacture.

But we cannot do any of this without better education of the next generation of workers and a sound global environment in which to work. And we won't do it if the warm hand President Obama stretched out to the manufacturing world at Hannover Messe in 2016 is replaced with an iron fist.

There is an elephant in the room. How do you get rid of the elephant? As the old joke goes, one bite at a time.

Bob Vavra, content manager, Plant Engineering, CFE Media, bvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me