'Confidence is growing' as technology consumption grows

AMT/AMTDA report shows 82.7% growth in manufacturing technology purchases in 2010; leaders point to 'continuing rebound of the U.S. manufacturing sector'

01/10/2011


November U.S. manufacturing technology consumption totaled $318.18 million, according to AMTDA, the American Machine Tool Distributors’ Association, and AMT - The Association For Manufacturing Technology.  This total, as reported by companies participating in the USMTC program, was down 17.7% from
October but up 81.1% when compared with the total of $175.68 million reported for November 2009.  With a year-to-date total of $2,792.58 million, 2010 is up 82.7% compared with 2009.

These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTC program.

“The November numbers reflect the continuing rebound of the U.S. manufacturing sector,” said Peter Borden, AMTDA President.  “Confidence in 2011 is growing and purchases are being made despite the capacity rates being below the threshold when this normally occurs. Backlogs and deliveries are lengthening while prices are increasing as supply lines struggle to meet the surprising surge in demand. Forecasts suggest things will slow – will this be the case? – stay tuned!”

The United States Manufacturing Technology Consumption (USMTC) report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. consumption data of domestic and imported machine tools and related equipment.  Analysis of manufacturing technology consumption provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.

U.S. manufacturing technology consumption is also reported on a regional basis for five geographic breakdowns of the United States.

Northeast Region

Manufacturing technology consumption in the Northeast Region in November stood at $62.68 million, down 35.6% from October’s $97.37 million but up 92.2% when compared with the previous November’s total. With a year-to-date total of $523.86 million, 2010 was up 77.7% when compared with 2009 at the same time.

Southern Region

Southern Region manufacturing technology consumption totaled $35.94 million in November, 9.8% less than October’s $39.83 million but 31.3% more than the November 2009 figure. At $384.77 million, 2010 year-to-date was 79.2% higher than the comparable figure a year earlier.

Midwest Region

Manufacturing technology consumption in the Midwest Region in November stood at $111.07 million,
off 4.7% when compared with October’s $116.50 million but 130.1% higher than the tally for the previous
November.  The year-to-date total of $855.38 million was 95.9% above the comparable figure for 2009.

Central Region

November manufacturing technology consumption in the Central Region totaled $71.30 million, down 22.9% when compared with the $92.42 million total for October but up 48.5% when compared with November a year ago.  The $722.78 million 2010 year-to-date total was 94.4% higher than the total for the same
period the previous year.

Western Region

At $37.19 million, November manufacturing technology consumption in the Western Region was 7.7% less than October’s $40.29 million but up 91.4% when compared with November 2009. The $305.79 million 2010 year-to-date total was 45.5% more than the 2009 total at the same time.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me