Compressed air: Find the leaks, lower the pressure, and measure the results

Create "good practices" around continuous monitoring of system leaks

12/28/2012


Monitoring of your compressed air system usage is a great first step to identify where your issues might be. Courtesy: Ingersoll RandCompanies often face the challenge of identifying best practices for compressed air energy conservation by assessing the value others have realized while putting best practices into action. Without fail, every month brings an assortment of technical epiphanies, attempting to inspire the compressed air consumer with an audit expert’s secrets to success.

As an organization, Ingersoll Rand has audited thousands of systems worldwide. We routinely work with multinational companies to develop and execute strategies designed to deliver energy savings while simultaneously improving operational quality, reliability, and productivity. Leveraging this experience and associated results, we have identified what appears to be the “best” compressed air best practice of all.

For the purpose of ranking the quality or significance of any product or service, it is common to use a good, better, best segmentation. With this as a guide, some easy-to-execute energy conservation measures that may be considered good practices warrant consideration. By redefining these common practices as “good practices,” what is arguably the “best” best practice can be articulated without the redundant abuse of the word “best.” 

Find the leaks

The first “good practice” is an obvious one: reduce the quantity of compressed air associated with leaks. This is an energy conservation measure that is usually executed by an organization without having to enlist the services of a specialized service provider. In theory, this should be easy because fixing a leak does not require specialized skills or capital expenditure.

Ultrasonic leak detection equipment has been readily available for years, and many organizations have purchased the tools required to easily locate compressed air leaks of all sizes during normal production periods. This technology allows an operator to hone in on the specific acoustic characteristics of a compressed air leak and filter out all surrounding production noise. This has made finding leaks easy, but unfortunately finding a leak does not impact the energy required to support a compressed air system.


<< First < Previous Page 1 Page 2 Page 3 Next > Last >>

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me