Comprehensive safety and health manual

Every company needs to have a safety plan of varying degrees of detail. If your company is just starting to put a safety and health program together, this book is for you. In fact, this book calls itself Your Company Safety and Health Manual.

03/01/2000


Every company needs to have a safety plan of varying degrees of detail. If your company is just starting to put a safety and health program together, this book is for you. In fact, this book calls itself Your Company Safety and Health Manual.

While a company's manual must have certain specifics spelled out, this book offers a boilerplate design for any company, large or small. It's a good jumping off point for anyone who is under pressure to create a safety program -- and fast.

The book begins with a general overview of how company staff is involved in the creation and execution of such a program. Management and employee responsibilities are spelled out, and a sample company policy form is supplied. Additional information on general safety procedures and accident prevention programs is included.

The book then launches into an alphabetical treatment of the various safety and health topics that need to be addressed by a comprehensive program. Each section defines what is included in the specific area, how to determine the correct permit or regulatory procedures, general rules, definitions, and applicable forms. Below is a listing of topics covered.

- Accident/injury reporting

- Biological agents/pathogens

- Carcinogens

- Chemical storage

- Contractor safety requirements

- Confined spaces

- Electrical safety

- Emergency management plan

- Ergonomics

- Fire protection and prevention

- First aid

- Hazard communication/right-to-know

- Hazardous waste issues

- Hearing conservation

- Hot work

- Housekeeping

- Laboratory safety-chemical hygiene

- Lead in construction

- Lockout/tagout

- Medical surveillance

- Process safety management

- Respiratory protection

Detailed appendices provide sample forms that can be used to record minutes at safety meetings or employee participation. Especially handy is a listing of all of the tables and forms that are included in the book.

This book is a complete reference to the new or seasoned safety and health manager because it presents all of the necessary information in one complete source. The information provided by this book does not ensure regulatory compliance, so it is in the best interest of the reader to become familiar with all applicable regulations.

Your Company Safety and Health Manual by O. Dan Nwaelele. Published by Government Institutes, Inc., 4 Research Pl., #200, Rockville, MD 20850; 301-921-2323. 1998, softbound, 438 pp. $79.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me