Collaborative robots and cybersecurity concerns for manufacturers

Some collaborative robots have cybersecurity flaws or weaknesses, which undermines the entire point of having a robot work together with humans in the first place. Manufacturers need to take the issue seriously and system integrators should ensure safe operating conditions.

10/31/2017


Image courtesy: Bob Vavra, CFE MediaCollaborative robots, or "cobots," are designed to work safely alongside humans in a number of ways from the laboratory to the warehouse floor to the production line. Robot makers go to great lengths to ensure these robotic systems are safe to work alongside humans.

Recent research has shown that some collaborative robots have cybersecurity flaws, which undermines the entire point of a collaborative robot and putting human workers at risk. Cybersecurity needs to be taken very seriously when it comes to collaborative robots. Why is it so serious? Is this different than cybersecurity in industrial robots?

The collaborative robot cybersecurity problem

With industrial robots, poor cybersecurity poses a major problem to the parts being produced. They could be produced just a millimeter or two off from the required specifications, causing part failure down the line. They could also be forced to stretch beyond their capabilities and break, or another of other things.

If someone hacks into a robot, they basically have full control. This presents many dangers with industrial robots, as it does with collaborative robots. But the two dangers are slightly different, since collaborative robots are meant to work alongside people. It's human laborers that are at most risk when a collaborative robot is compromised.

The cybersecurity solution for collaborative robots

Much of this responsibility lies with the manufacturer of the robot, so it's wise to keep an eye on which manufacturers are taking cybersecurity seriously. Outside of them, the robot system integrators also have a major responsibility to ensure safe operating conditions.

For example, the system integrators should limit the force and power of collaborative robot clamps, just to prepare for a worst-case scenario. They can also limit momentum and tool orientation to further improve safety.

A system integrator plays an important part in the safety of collaborative robots. While a robot manufacturer has to provide the foundation for a secure robot, a system integrator can still improve safety in other important ways.

Cybersecurity for collaborative robots has recently emerged as a vital part of collaborative robot deployment. Vulnerabilities in cybersecurity undermine the entire purpose of collaborative robots and put people in harm's way.

This article originally appeared on the Robotics Online Blog. Robotic Industries Association (RIA) is a part of the Association for Advancing Automation (A3). A3 is a CFE Media content partner. Edited by Chris Vavra, production editor, Control Engineering, CFE Media, cvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me