CMMS: Work out the kinks in maintenance

When it comes to maintenance, don’t underestimate the value of CMMS consulting and maintenance organization analysis.

12/28/2012



A longtime client (a large facility) approached us about taking their CMMS to “the next level.” After holding meetings with the maintenance staff, we discovered frustration between the technicians and their supervisors about the basic functions of their CMMS. “We need the system to go faster,” was the common complaint of users during our meetings. I instantly wondered how effective they were in using the core functions of the system.

The client had been using the CMMS productively for years and had amassed tens of thousands of work orders (WOs) and related items. While the maintenance team had attended training soon after installation, few of the original users were still in the same “troop level” positions as a result of turnover and promotions within the organization. Unused (or under-used) training and support assistance had led to some poor user behaviors.

For example, routine preventive maintenance items (PMs) on 50-plus identical assets, which rarely warranted more than an acknowledgement of task completion, were each being closed individually by a single technician. While closing a single WO only takes seconds, multiply that by 50 and you’ve wasted nearly enough time to bring maintenance to a screeching halt. The one technician actually had a fairly easy option to close all 50 WOs at once directly within the software. As a result, this process was optimized: all of those extra clicks were reduced to one and all 50 WOs can now be closed in a few seconds rather than one at a time.

This example was just one of many areas in which operational use of the CMMS was enhanced as a result of analysis and training. Is the system any faster? The software is the same, the servers are the same, but users are now spending less time doing routine tasks with more available wrench time and maintenance planning. In the end, the users are faster and more efficient.

By assisting the client organization to focus on additional work order data, such as problem codes, cause codes, and more, we were able to guide them toward better analysis and, ultimately, better CMMS ROI. We were able to introduce a wider use of the CMMS so more employees could take advantage of capabilities beyond WOs and PMs, like planning for capital expenditures, managing replacement parts inventory, managing outside vendor repairs and contracts, meeting safety compliance, and so on.

The takeaway here is simple: don’t underestimate the value of CMMS consulting and maintenance organization analysis. What started out as a project to take things to “the next level” ended up as a cleanup/optimization project that allowed for a nice combination of both improving a client’s current maintenance operations while introducing software functionality for an overall improved customer experience.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me