CMMS keeps a watchful eye on outside contractors

All contracted work should be tracked by a CMMS database. Just as the maintenance manager assigns a job to a staff member and issues a work order, he should do the same for outside technicians.

10/01/2013


Outside contractors come in many shapes and sizes. There’s your contractor technician who shows up regularly to service the elevators. These technicians make regular visits to the facility and are treated like employees. Other contractors elicit the same trust but come to the plant less often, although the appointed maintenance technician may remain the same. Finally, there’s the ad hoc repairman who could service an air conditioner in his sleep. He comes by way of an Internet search, or the phone book.

Other than this last category, all contracted work should be tracked by a CMMS database. Just as the maintenance manager assigns a job to a staff member and issues a work order, he should do the same for outside technicians. The CMMS database should associate the outsourced technician with a fixed asset and keep a log of all maintenance tasks completed per visit. Next time the same technician makes a scheduled call, the CMMS automatically creates a PM work order for that technician. Also by co-mingling contractor and staff work orders, managers can compare internal and external responsiveness and performance. More on this later…

PMs handled by outside contractors should trigger reminders in a CMMS so managers know which machines are scheduled for routine maintenance and by when. Even if the contractor is responsible for scheduling these visits, it is helpful to get that extra reminder from your CMMS. The CMMS should call up both short term and long term PM schedules, with inside and outside team resources assigned to each PM task. Maintenance managers should also be able to show overdue work orders assigned to contractors to help control backlogs, do predictive analysis, negotiate contract renewal rates or, if necessary, choose a better provider.

Most importantly, a CMMS should gather information about the vendor’s performance, quality of work, completion dates promised, etc. Did the technician show up on time? Did she fix the machine only to return a month later to make the same repair? Did she charge for the repeat visit? Did a replacement part get delayed in shipping and cut into production time?

The data stored in a work order should answer these questions and more, and help managers make decisions about renewing or negotiating contracts, or justifying new hires. Besides the usual equipment specs, schematics, operations manuals, etc. the work order should capture and quantify the vendor’s effectiveness; frequency, quality and rate of completion of repairs, response time, time and materials, contract renewal costs, etc.

By capturing key information, a CMMS helps managers keep an eye on outsourced contractors and shows them which ones have gained the top position on your “A” list of preferred providers.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me