Chinese module suppliers see short-term pain, long-term gain

In spite of recent troubles in the PV industry, many suppliers see the potential growth as very strong, which will help the industry long-term.

09/30/2011


I was lucky enough to attend Suntech’s 10th Anniversary Celebrations in Wuxi this week and witnessed first-hand the company’s (and country’s) ambitious plans in the PV industry in future, highlighted by the inauguration of their huge new facility in the city.

Around 500 people gathered at the invite-only event at a nearby hotel and joined in a huge banquet and celebration that included all of Suntech’s senior management as well as customers, partners and just a few people that had nothing to do with the PV industry at all. What really struck me at the event was how positive they all were – amazing considering the current industry conditions and continual bad news that’s hampered the industry almost the whole year.

Suntech Founder and CEO Dr. Zhengrong Shi described the PV market as “being in winter” but was adamant that “spring would arrive soon”. Quite simply the attitude in the huge forum could be summarized as “We know the industry is suffering, but it’s a short-term problem. We know there is too much capacity, but we’ll still need more in future to conquer the industry”.

You could consider this attitude as cavalier, but frankly I found it a refreshing change. Amidst all the doom and gloom surrounding the PV industry as companies see prices and margins plummet, it’s important to look back at what the industry has achieved so far. As I pointed out in my opening presentation at the event’s ‘market forum’, when Suntech entered the PV market in 2001, annual installations were just 350MW. Prices were nearly five times higher and just a handful of suppliers were active. Now in 2011, 10 years on, we’ll likely see installations reach 23GW – 65 times larger than 2001, which has created hundreds of thousands of jobs (and not all of them in China) and allowed prices to fall to a level at which PV is on the brink of the mainstream.

Profile photo of Ash Sharma, senior research director for photovolatics at IMS Research. Courtesy: IMS ResearchSo despite the recent slowdown in demand and the several on-going difficulties the industry is facing, many of the people at the event were still very positive and still extremely ambitious. Many talked about changing China from being a production base for PV, to one for actual PV deployment. Some in fact even suggested China would install 3GW of capacity this year and would not be beaten to the number one spot by the USA in future years. I’m very positive about China’s future deployment plans and the country has certainly changed from just big talk to making real big progress, but even our most optimistic forecasts wouldn’t see 3GW being added to China this year – but I’d happily be proved wrong and I’m sure many others would too!



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me