Chinese market for low voltage ac, dc motor drives enters period of steady growth

According to a recent IMS Research study, The Chinese Market for Low Voltage Motor Drives - 2012 Edition, revenue growth in this market slowed considerably in 2011 from an abnormally high 2010. Revenues from motor drives (excluding software and services) are projected to grow at a compound annual growth rate of 13.7% from 2010 to 2015.

04/20/2012


According to a recent IMS Research, recently acquired by IHS Inc., study, The Chinese Market for Low Voltage Motor Drives - 2012 Edition, revenue growth in this market slowed considerably in 2011 from an abnormally high 2010. Revenues from motor drives (excluding software and services) are projected to grow at a compound annual growth rate (CAGR) of 13.7% from 2010 to 2015.

The total Chinese market for low-voltage ac and dc motor drives (including software and services) was estimated at $2.68 billion in 2010. The Chinese Government’s RMB 4000 billion stimulation policy and other domestic consumption policies enabled healthy growth in the market to continue from 2009 to 2010.

“In the first half of 2011, the markets for low-voltage drives were still growing strongly. In the second half of 2011, as the Chinese Government tightened monetary policies and imposed strict lending conditions; this caused delays in numerous large projects, such as high-speed railways, city metros, highways, and factory renovation projects. These policies are also causing financial strain for both end users and machine builders”, commented Wilmer Zhou, senior analyst and report author. In June 2011, the market went into a precipitous decline. The bad news first came from local small and medium machine builders in South and East China; many reported no new orders during the second half of the year and many small machine builders went bankrupt and closed. The low-voltage motor drive market has been more affected than that for the medium-voltage drives, because of its greater dependence on machine builders. Nevertheless, with $3.1 billion in revenues in 2011, China still accounted for 25% of the world market for low-voltage motor drives.

The new report found that ABB and Siemens were the market leaders in the Chinese low-voltage motor-drive market in 2011, with 16% and 13% share respectively. Market leadership is concentrated, as the top five suppliers accounted for nearly 46% of the total. However, there is a large tail of suppliers, each with less than 1% of the total revenues. Wilmer states, “Because of the Japanese earthquake, component shortages, and other reasons such as the appreciation of the Japanese Yen in 2011, European and local Chinese suppliers are taking share from several Japanese suppliers.”

Growth in the Chinese market will continue, because of implementation of policies regarding motor efficiency and energy-saving renovations in various industries. But market growth will be at a lower rate than in the past few years as investment is reduced in the near future, with concerns over high inflation in China.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me