China versus the U.S.: A battle over pipe tariffs

A tariff battle is being waged over steel pipe imported from China.

12/11/2007


Last month, the U.S. Department of Commerce found that the Chinese government has been providing improper subsidies on Chinese circular welded steel pipe exports to the United States.

Circular welded steel pipe products are described as standard and structural pipe used in plumbing applications, HVAC systems, sprinkler systems, fencing and construction.

In its preliminary determination, the Commerce Department will impose tariffs on China pipe exports to offset the unfair advantage of subsidies. The United States found that Chinese pipe was subsidized by an average rate of 16.59%. Individual rates ranged from a high of 264.98% down to 0% for one company.

Most Chinese producers will be subject to a duty of 16.59%. The Department of Commerce has also applied critical circumstances, determining that this duty could be applied retroactively by 90 days.

The pipe imports subject to the petition against China have surged from 10,000 tons in 2002 to more than 750,000 tons in 2007—a 6,900% increase. The result has been the loss of 500 domestic jobs, approximately 25% of the total workforce employed in this segment of the domestic pipe industry.

Treasury Secretary Henry M. Paulson Jr. and other cabinet members are preparing for the next round of a “strategic economic dialogue” beginning in Beijing on Wednesday, aimed at easing tensions. But in many cases the two nations seem to be talking past each other, aggravated by American actions like the threatened steel duties or China’s reluctance to crack down on unsafe food and toys.

At a time of heightened American anxiety over the effects of globalization, tension among manufacturing plant workers illuminates how esoteric trade disputes, where the facts are often ambiguous, usually boil down to little more than American jobs versus Chinese jobs.

For the United Steelworkers’ angle on this story, click here .

For The New York Times article on this subject, click here .





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me