CAGI marks its centennial

Compressed air management has a rich legacy after 100 years.


Right now, inside your plant, compressed air is generating enormous power that is crucial to your plant’s productivity. It could be that compressed air is used in your production process.  Or perhaps compressed medical air or gas is used in your local hospital or dental clinic. Known as “industry’s fourth utility” (electricity, gas, and water being the other three), this invisible source of power is safe, clean, easy to use, and increasingly energy efficient.

The group that steers manufacturers in the compressed air equipment segment is the Compressed Air and Gas Institute (CAGI), which marks its centennial year in 2015. This is the story of how one of America’s oldest trade associations has grown and developed into the industry’s most influential entity.

CAGI’s rich history is distinguished by remarkable advances along several fronts, but two key areas stand out:

  • Developing standards and programs that refine the safety, efficiency, and sustainability of compressed air systems and tools
  • Producing cutting-edge educational tools.

But let’s start at the beginning…

In 1915 the Compressed Air Society is established for manufacturers of compressed air systems.Born amid America’s growing power

A new trade association for compressed air systems emerged when the U.S. Justice Department relaxed its rules in order to strengthen America’s international economic power. The result was stronger industries and new trade associations that exchanged lawful and helpful information, shared industry statistics, and produced improvements to manufacturing practices.

In this environment, the “Compressed Air Society” was established in 1915 to bring together manufacturers of compressed air systems to solve common problems, promote the industry, and work for the greater good.

Progress through pain

Having passed through the comfort and affluence of the Roaring Twenties, the Society found itself in the midst of the Great Depression. When the industry’s companies were faced with a serious challenge to survive, the association took two huge steps that would positively shape its work and influence for decades to come.

At the society’s annual meeting in New York City in 1933, the Compressed Air Society changed its name to the Compressed Air Institute (CAI). As an educationally and technically oriented “institute,” CAI realized the benefits of a concerted effort to develop standards and produce educational tools. Product standards would direct the institute’s focus toward continual improvement in technical and regulatory aspects of compressed air products. Educational materials would inform key audiences about these products and their benefits.

In 1947 the first edition of the Compressed Air Handbook is published. The first major achievements

The Technical Committee moved quickly to address a safety code for working with compressed air. In 1938, CAI formally adopted codes for centrifugal and displacement compressors.

The first major accomplishment of the Educational Committee was a concerted effort to produce an exhaustive and authoritative reference work about compressed air and the proper installation, use, and maintenance of compressors and pneumatic equipment. Progress in developing this massive resource was stalled by America’s total investment in the war effort.

As the war was winding down in 1945, the Compressed Air Institute changed its name again to recognize the growing number of the industry’s products that used the compression of gases other than air. The new name stuck: the Compressed Air and Gas Institute (CAGI).

In 1947, CAGI’s Educational Committee finally completed its momentous achievement: the Compressed Air Handbook. By 1951, 16,000 volumes had been distributed, with 2,000 copies in the hands of non-members, booksellers, libraries, and students.

The association publishes the third edition of the handbook, changing its name to the Compressed Air and Gas Handbook in 1961.Educational progress: 1950-1970

Shortly after work on the handbook concluded, the Educational Committee focused its efforts on teaching more key audiences about the benefits of compressed air. Those efforts were often significant projects that used cutting-edge communication tools to carry that message.

In the late 1940s and early 1950s, even before the ABC television network began, CAGI produced a motion picture film, titled “Compressed Air Power,” targeted for use in colleges and engineering schools. The film would continue to be used for the next 40 years.

CAGI’s innovative efforts turned heads. In a 1952 competition with other U.S. trade associations, CAGI received a distinguished service award for its progressive educational program. Encouraged by such success, CAGI devoted more than half of its budget to the Educational Committee.

The institute published the second edition of the Compressed Air Handbook in 1954, followed by the third edition in 1966. Between these two editions, in 1962, CAGI’s Rock Drill Section published its Handbook on Preventative Maintenance.

Through the 1960s, CAGI invested significant time and funding to producing educational articles in professional publications such as Plant Engineering. This initiative would soon generate more than 40 expert articles on key issues involving compressed air.

<< First < Previous Page 1 Page 2 Page 3 Next > Last >>

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me