‘Business is booming’ and so is the PMI Index

ISM report hits 12-month high, climbs for the 5th straight month

11/04/2013


One industry leader in the textile industry suggested that “new business is booming” and the October Institute for Supply Management PMI index shows the same trend.

The PMI jumped to a new 12-month high of 56.4% in October, up two-tenths from September’s figure. The results came in the same month as the two-week federal government shutdown, and while the PMI didn’t drop as a result, ISM officials said their reporting members were mixed about its actual impact on the manufacturing sector.

“The panel's comments are generally positive about the current business climate; however, there are mixed responses on whether the government shutdown and potential default have had any effect on October's results,” said Bradley J. Holcomb, chair of the Institute for Supply Management Manufacturing Business Survey Committee.

ISM report hits 12-month high with 56.4%, which is up two-tenths from September and is the fifth straight month for growth. Courtesy: Institute for Supply ManagementOverall, the PMI grew for the fifth straight month, and since slipping to 49.0 in March, the PMI has risen 15% in the next five months. The New Orders Index and Production Index each finished above 60% for the third straight month, indicating strong demand.

Many of the monthly comments about the manufacturing sector focused on the government shutdown or the prospects for the holiday shopping season. Among the comments:

  • “New business is booming.” (Textile Mills)
  • “The government shutting down and threatening to go into a default position is causing all kinds of concerns in our markets.” (Fabricated Metal Products)
  • “The government shutdown has not had any impact on our business that I can determine, nor has it impacted any supplier shipments.” (Chemical Products)
  • “Government spending continues to be slow in defense and military. The government shutdown and debt ceiling crisis did not affect business.” (Transportation Equipment)
  • "Telecom market — wireless and VOIP — appear to be spiking. We are very busy; busier than we have ever been." (Computer & Electronic Products)
  • “Seasonal demand has not decreased at the typical pace. Market showing resiliency in the residential market.” (Primary Metals)
  • “Business continues to improve every month for the past nine months.” (Furniture & Related Products)
  • “Big box store discounting providing increased sales bump short term.” (Food, Beverage & Tobacco Products)
  • “Our customers continue to be cautious and are closely managing their purchases. Business continues to be flat to slightly down.” (Machinery)
  • “Outlook on general appliance market continues in a positive direction. Uncertainty, however, looms with unclear government direction pending.” (Electrical Equipment, Appliances & Components)

The Last 12 Months



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me