Building up the price of materials

Spring has sprung, and producers of building materials are off and running. From January to February, 10 out of 19 industries in our plant construction and maintenance supplies group pushed through price hikes. Two that increased average product prices most dramatically included the softwood plywood industry, with a 4.


Spring has sprung, and producers of building materials are off and running. From January to February, 10 out of 19 industries in our plant construction and maintenance supplies group pushed through price hikes. Two that increased average product prices most dramatically included the softwood plywood industry, with a 4.3% monthly price hike, and gypsum products, with a 1.9% increase.

In many cases, higher tags have a solid cost-based foundation. Average and even seriously below average margins are a common ailment. One coping strategy is to increase prices. In the most extreme case, in order to restore manufacturing-related margins to average levels, the typical manufacturer of gypsumboard would need to push though a price increase of 11.5%. Softwood plywood producers, meanwhile, would require an average price hike of just 1.7% to achieve the same objective.

Some inflation hot spots, however, may be worth fighting. One possible battlefield is the noncurrent-carrying wiring devices industry. In February producers in this industry hit buyers with a 1.3% price increase. But margins in SIC 3644 have been rising steadily since September '00 and now stand well above normal. Price target analysis from Thinking Cap Solutions suggests SIC 3644 can afford to cut tags by 3.2%, which would bring margins back to average levels. Other industries that enjoy above-average margins along with the price cuts that would restore margins to average levels include: millwork, which can withstand a 3.7% average price cut; hardwood plywood, cut 3.2%; paints, cut 5.8%; other structural clay products, cut 5.2%; and metal doors, sash and trim, cut 1.6%.

Price/cost/demand roundup

Average Product Prices Direct MFG. Costs Growth in U.S. End Markets
Change, %, During 12-Mo Ending... and Margins Grade Change, %, during 12-Mo Ending...
Industry SIC Nov 01 Feb 02 Costs are... Grade Nov 01 Feb 02

the average producer in an industry. Grades of A to A+ mean plant engineers may be able to strike a better bargain with suppliers and better control plant costs. ).
General Sawmills and Planing Mills2421-4.75-1.71stableC-2.04-1.14
Hardwood Veneer and Plywood24350.46-0.02risingA-1.25-0.93
Softwood Veneer and Plywood2436-3.640.47stableC-1.25-0.93
Metal Partitions and Fixtures25420.810.50stableA0.540.46
Paints and Allied Products28512.372.27risingA-2.64-1.25
Flat Glass32110.66-0.44fallingF-2.03-6.18
Other Structural Clay Products32597.235.59stableA2.081.77
Gypsum Products3275-24.21-17.48stableD-0.61-0.08
Mineral Wool3296-0.95-0.45stableC0.370.63
Steel Pipe and Tubes3317-2.02-3.05stableC-4.91-5.65
Plumbing Fittings and Brass Goods3432-0.83-1.48stableC1.481.39
Metal Doors, Sash and Trim34421.231.09stableB1.301.33
Sheet Metal Work3444-0.02-0.47stableA-0.29-3.52
Refrigeration and Heating Equipment3585-0.050.20stableC-3.54-0.72
Current-Carrying Wiring Devices3643-0.90-1.21stableF0.76-2.70
Noncurrent-Carrying Wiring Devices36442.101.76stableA0.76-2.70
Commercial Lighting Fixtures3646-0.10-0.28stableD0.14-0.11
Environmental Controls38220.120.11stableC0.550.60

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me