Bridging the gap: Urgent need for solutions is being met, time for action

There was at once a sense of urgency and purpose as manufacturers and educators gathered to address the lack of skilled workers for manufacturing.

09/22/2012


A student at Gateway Technical College in Kenosha, Wis. learns work-ready skills for the photovoltaic energy industry at the school's Alternative Energy Laboratory sponsored by Snap-on, Inc.There was at once a sense of urgency and purpose as manufacturers and educators gathered in Kenosha, Wis., in August [2012] to look at how to address the lack of skilled workers for manufacturing.

The symposium’s title, Bridging the Gap, summed up well the day’s discussion.

The setting was Gateway Technical College, one of the many educational institutions helping to deliver workers into the workforce as quickly and competently as possible. The meeting was convened by the National Coalition of Certification Centers (NC3), and organizations of manufacturers and community colleges focused on delivering qualified workers with portable skills certification.

No one questioned the urgency of the issue, which finally is getting attention from the popular media, the major political candidates, and from educators looking to offer an additional career choice for the nation’s young people, returning veterans, and unemployed and under-employed workers. The challenge, as it has been for almost a decade, is to move from discussion to action.

Studying the problem

The problem of educating America’s manufacturing workers stems from, of all things, a lack of education. The U.S. Manufacturing Competitiveness Dialogue hosted by the Georgia Institute of Technology and the Council on Competitiveness talked about the lingering Skills Gap. “This situation is, in part, a by-product of public misconceptions that factory work is a dirty, low-paying, and dangerous job that is in short supply. This stigma has led a younger generation to pursue careers in other industries,” the study stated. “However, the era of unskilled factory jobs is over. Today’s workers are highly skilled employees who operate complex equipment in safe, clean environments.

“The issue of resolving this situation of a deficit of workers carries added urgency because 2.7 million workers, or one-fourth of all U.S. white- and blue-collar manufacturing employees, are aged 55 and above. The aging workforce presents a knowledge gap as well because their tremendous store of experience will retire with them rather than be passed along to younger workers.”

It was that reality that brought together educators from around the country to Kenosha and to Gateway’s gleaming campus. The meeting was co-hosted by Snap-on Tools, a global manufacturer whose world headquarters is in Kenosha and that has used Gateway graduates to meet its own manufacturing needs. Snap-on Tools also has equipped the Gateway classrooms with tools and materials.

These kinds of public-private partnerships are pivotal to manufacturing’s continuing growth, and its competitive position globally. Paul Taylor, chief economist for the National Automobile Dealers Association, told the group that the U.S. needed to improve science, technology, engineering, and mathematics (STEM) training to improve on its ranking of 20th in the world.

Among the suggestions offered by the attendees:

  • Manufacturing must improve its own marketing, reaching out to students through traditional forms (parents, teachers, coaches) and social media.
  • Manufacturers must also create a peer-to-peer relationship, bringing current young people in their own plants to help recruit future workers.
  • Replicating the U.S. Army’s recruiting efforts, manufacturers must reach beyond the traditional Sunday morning talk shows to deliver the message about modern manufacturing.
  • Manufacturers need to create better certification for workers so potential employers have confidence in the training workers are receiving.
  • Manufacturing also must create stronger public-private partnerships along the lines of the one Gateway and Snap-on Tools have established. One suggestion from the Oklahoma State University Institute of Technology was to create three-day summer academies for teachers, who would receive a small stipend to come in, review the facility, and take some hands-on courses.

Some states aren’t waiting. In Kansas, if a high school student receives certification in a high-demand field, the high school receives $1,000 per student. High school students who enroll in a technical education program have their tuition and transportation to the school covered. The proposal by Gov. Sam Brownback came after the enrollment in high school technical education dropped more than 48% from 2007-08 to 2011-12.

Ideas like this shared at the roundtable in Kenosha were plentiful, but even if all of them were implemented today and schools were filled with students yearning for manufacturing skills, the training process still will take time.

“If we are to meet the unprecedented need for industry-driven certifications and provide our labor market, our students, our regions, and our nations sustainability in this volatile economy, we must act now,” said Roger Tadajewski, executive director of the NC3. “We must show commitment from industry and educators while asking for support from the current administration.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me