Branch circuit monitoring, overhead busway to drive growth for data center power distribution

More than 80% of the $440 million dollar global revenues in 2011 from data-center power-distribution hardware came from transformer-based power distribution units, remote power panels, and static transfer switches.

04/16/2012


More than 80% of the $440 million dollar global revenues in 2011 from data-center power-distribution hardware came from transformer-based power distribution units, remote power panels, and static transfer switches. This is according to IMS Research, recently acquired by IHS Inc., in their new study covering three-phase power distribution in data centers. However, the forecasts show new products, such as overhead busway and branch circuit monitoring, will become increasingly popular, commanding upwards of 30% of hardware sales by 2016.

The world market for power distribution traditional vs. new hardware market sizes. Source: IMS Research

The overhead busway market is currently being driven by new enterprise data centers. Retrofitting existing data centers with overhead busway is complex and expensive; however, new builds can immediately realize the benefits of lower installation costs, space savings, and flexibility in future expansion from using overhead busway. While this is a large growth opportunity, it is somewhat limited by the fact that new data center builds take an enormous amount of capital and tend to get pushed back in tough times.

Branch circuit monitoring (BCM) is the smallest of the three-phase power distribution hardware markets. Growing concern over the energy consumption of data centers, combined with increasing electricity prices, has opened the BCM market to significant opportunities for growth. IMS Research Analyst Lori Lewis explains, “BCM is already on the rise in colocations because of their ’pay for the power you use‘ billing approach. With all of the bells and whistles that can be configured into BCM. However, more data centers are likely to adopt it to monitor and manage their power consumption.” Lewis adds, “Soon, BCM will become a standard feature in much of the hardware that is sold in the data center; this is why we are forecasting revenue growth, not only for BCM, but also for power distribution units (PDUs).”

With the competitive landscape largely based in the U.S., North America is the largest market for both of these products. While PDUs and RPPs have tended to be seen largely as North American products, BCM and overhead busway have universal appeal. Asia’s market is relatively small compared with that of North America, but there is potential for market growth for these products in the next five years. Growth in Europe, on the other hand, will be delayed as the region will require further convincing of the benefits of overhead busway, and will need local supplier presence to drive cost-saving and product awareness.

Right now, the largest suppliers of overhead busway are Starline, Power Distribution, Inc., and Eaton, each with more than 20% market share. BCM’s largest suppliers are Power Distribution, Inc., and Schneider Electric, each with more than 25% market share. While these markets have just a few major suppliers, it is likely that more competitors will try to gain a stronger presence because of the important opportunity these products represent. This will further grow this market in size and recognition.

IMS Research regularly analyzes all aspects of the data center infrastructure market. More information regarding these detailed reports can be found here.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me