BP exit solar market as industry margins evaporate

BP Solar announced that it will end its activities in the PV market today, citing it being “Difficult to sustain long-term returns for the company."

12/22/2011


BP’s decision is a clear indicator of the challenges that PV module suppliers face in remaining profitable in the current industry conditions. PV module manufacturing capacity has hit 50 GW this year, despite demand reaching just 24 GW. The resulting oversupply has put huge pressure on prices, and average prices are now 44% lower than they were one year ago. Average gross margins are now in the single digits, and most suppliers are making net-losses on their operations. 

Recent high-profile solar investment announcements from the likes of Google and Warren Buffet’s MidAmerican Energy may seem to contradict the move from one of the World’s largest Energy companies. However, these recent investments have all been further downstream in financing large utility-scale systems. These investment cases are very different to operating as a module supplier in today’s climate and so are not likely to be affected by BP, or other suppliers’ departures from the industry.

Recent years have seen huge swings in the balance between supply and demand in the solar industry. From mid-2009 through to the end of 2010, demand out-stripped supply and all suppliers were able to sell their products. This situation has changed dramatically in 2011, when rapid manufacturing expansions have coincided with a slowdown in the growth of global demand. The result has been intense competition and a fierce price war, and not enough demand to support all of the industry’s hundreds of suppliers. Clear winners in 2011 have been large pure-play Chinese suppliers, whose lower cost structure and highly aggressive pricing has allowed them gain market share throughout the year. Consequently, 4 of the world’s 5 largest suppliers of PV modules are now Chinese.

A BP spokesman in the US had commented today that "BP’s goal is to profitably grow in specific segments of the energy industry." BP has clearly abandoned hope of achieving growth or profitability in this space.

BP’s exit is not the only recent high-profile exit from the industry. With a fierce price war led by low-cost Chinese suppliers dragging most suppliers’ bottom lines into the negative, it is not likely to be the last either.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me