Bluetooth’s domination of the car – Is it still coming?

Back when I started looking at Bluetooth in-car applications, Bluetooth seemed the best thing since sliced bread.

06/28/2012


I’ve been the author of market research reports on “Bluetooth in Automotive Applications” and “The Wireless Car” for many years now. Back when I started looking at Bluetooth in-car applications, Bluetooth seemed the best thing since sliced bread. Anyone that was anyone wore a Bluetooth headset; “toothing” was all the rage; and I, like many others, thought that Bluetooth would eventually rule the world.  

Fast forward 5 years and, yes, the uptake of Bluetooth in the car has been pretty impressive. Hands-free calling has clearly been the most successful application. Uptake has reached 100% in some models and is offered as an optional extra in the vast majority of cars.  And I must admit when I brought my new car and it included Bluetooth, it was like Christmas had come early.   

One could also argue that A2DP has also been fairly successful.  But unfortunately, to my knowledge, not many drivers use it or even know its purpose. I can genuinely see the benefits of A2DP for cordless audio streaming and have longed to see its success inside the car and out. But if I hear “Once Apple pushes this feature the market will explode” once more, I’ll scream! Don’t get me wrong; I did believe it but after 5 years it’s wearing a bit thin.

And what about all the other promises we were made? I can remember getting quite excited about the concept of Bluetooth high speed for in-car video distribution and wireless camera modules. But with all the setbacks in the technology and the industry seemingly keeping hush about its demise, I guess it just wasn’t meant to be.   

To be fair the automotive industry is a lot harder to crack than the market for consumer devices. So even though Bluetooth Smart (formerly known as Bluetooth low energy, Bluetooth Ultra-low Power and WiBree) can be used in wireless sensors, tyre pressure monitors, keyless entry and so much more, I’m not getting my hopes up just yet.

The automotive industry is notoriously cautious and no new technology will enter the market until it has been rigorously tested. There are two main issues. First, reliability requirements in vehicles are extremely high; there is no room for error; and the industry sets very high standards. Fundamentally, wires have been doing a good job up to now; so unless a wireless technology can prove like robustness, wires will continue to reign. Second, wireless sensors will still require at least one wire for the purpose of powering the sensor. It could be argued that if one wire is already in place, there may as well be two?

In spite of this, I do live in hope that Bluetooth will rise phoenix-like to its former glory. My plea to the Bluetooth industry is to stop re-branding and innovate. So maybe when I buy my next car (goodness knows when that’ll be) I can relive that euphoria; and who knows I may be able to use Bluetooth for viewing vehicle diagnostics, remote keyless entry, driver wellness and not just hands-free calling!



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me