Bluetooth Smart to be the wireless technology most used in consumer medical devices by 2016

A recent study forecasts that by 2016, wireless-enabled consumer medical devices will use Bluetooth Smart technology the most.

06/25/2012


IMS Research, recently acquired by IHS Inc., projected that by 2016, wireless-enabled consumer medical devices will use Bluetooth Smart technology the most. IMS Research forecasted that more than 4.7 million consumer medical devices containing Bluetooth Smart will be shipped in 2016 with more than 10.3 million shipped from 2012 to 2016.

According to IMS Research’s recently published study, Wireless Opportunities in Health and Wellness Monitoring – 2012 Edition, more than 35% of wireless-enabled consumer medical devices shipped in 2016 will contain Bluetooth Smart. In 2012, 5% of consumer medical devices shipped will be able to make wireless connection; in 2016, it will be 9%. IMS Research projects that ANT technology will also be available, with more than one-half million ANT-enabled consumer medical devices shipped in 2016.

IMS Research senior analyst Lisa Arrowsmith commented: “One big reason for Bluetooth Smart being used in consumer medical devices is the projected increase in Bluetooth Smart Ready devices, most notably in cellular handsets. IMS Research believes that by 2015, all phones that would have been enabled with Bluetooth will be Bluetooth Smart Ready. These devices can give consumer medical devices additional functionality such as uploading medical information to apps and cloud-based services, as well as other features such as an advanced display. While ANT has also been adopted in some cellular handsets, it is not expected to reach the same levels of adoption as Bluetooth which will its uptake in some consumer medical devices.”

Currently, most wireless-enabled consumer medical devices are using either Classic Bluetooth or proprietary wireless technology to communicate with specific devices such as dedicated health hubs or cellular handsets. For consumer medical devices using Classic Bluetooth, power consumption is always a key factor since most of these devices use batteries. Bluetooth Smart will offer the same levels of connectivity while also offering lower power consumption. However, even with this benefit, it is unlikely that medical OEMs will move over from Classic Bluetooth to Bluetooth Smart quickly because of the long design cycles that are commonplace, resulting from the strict regulations placed on medical devices.

“Although Bluetooth Smart can offer significant benefits in terms of power consumption and usability for consumer medical devices, OEMs are reluctant to move over to the technology with any great pace,” Arrowsmith added. “Most will continue to support Classic Bluetooth while releasing a Bluetooth Smart model in line with their existing design schedules. The cost of certification and regulatory approval is also another factor that will slow down the uptake of Bluetooth Smart in consumer medical devices as design cycles remain long, with 12-18 months on average for a new medical device to be approved and available to consumers.”

IMS Research’s latest report, Wireless Opportunities in Health and Wellness Monitoring – 2012 Edition, assesses the uptake of 10 connectivity technologies in five consumer health-monitoring devices, five types of dedicated health hub, and five sports and fitness monitoring devices. Additional segmentation is also provided for the uptake of consumer health devices in three major regions (Americas, EMEA and Asia-Pacific). This report was published in March 2012.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me