Blog! Five Fast Things for December 8, 2006

12/08/2006


1. Air conditioning in January? Chicago awoke today to find temperatures in the single digits, wind chills below zero and frost everywhere. (If you are south of Nashville, stop snickering. We here up north see the way you drive when there’s a little ice on the road, and it’s hysterical.)

So anyway, talking about air conditioning at this time of the year seems a bit misplaced, but the annual AHR Expo is on the horizon in Dallas on January 29-31. This year’s event will focused on topics important any time of the year.

An AHR survey found the key industry issues are: energy efficiency, building controls and automation, green building issues and indoor air quality.

The Expo promoters will have a lot to say on those topics when the show opens next month. For a look at what the show has to offer in 2007, click here .

2. Healthy buildings in the air: ASHRAE’s Indoor Air Quality conference in Baltimore isn’t until Oct. 15, but it’s an issue that shouldn’t have to wait for a conference. Green buildings are increasingly an issue, especially in manufacturing, and a number of progressive manufacturers are looking at sustainable air quality as a driver of a better workplace environment. As we’re looking to hang on to employees and keep the ones we have healthier, this kind of initiative, properly communicated, shows workers we care about healthy and safety first.

“A building' health and efficiency impact everyone,” said Larry Schoen, chair of the committee organizing the conference. “It’s important to discuss how our designs as building professionals will affect the occupants’ lives and the global community for many years to come.”

3. ERP spending to grow: Trying to draw a straight line in manufacturing is getting difficult. Jobs are up one month, down the next. There’s a shortage of workers on one side, job cuts elsewhere. Money is tight, but spending on emerging technology in manufacturing is on the rise.

The latter point is made again by AMR Research , which just released a report showing that enterprise resource planning spending will jump 12.3% in 2007. “The survey found that technology buyers understand the need to invest in better information systems, and in most markets they have the capital to do so,” a press release on the report noted. “The survey found that globalization and lean manufacturing are the two most important business issues companies plan to address with ERP investments. 43% of respondents aim to have a single global ERP system within three years—compared with only 26% today.”

4. Chatting about China: The National Association of Manufacturers has been pushing the U.S. government to put more pressure on China to revalue the yuan to a more market-driven currency rather than one set at low levels by the government. Lower cost currency increases the consumer price on imports and artificially reduces the price of domestically-made products. So if China wants to work and play well in a global economy, NAM reason they ought to be playing by the same economic rules as everyone else.

A meeting last week with senior Bush Administration officials re-emphasized that point. “Our board-level task force delivered a clear message: we need to see progress from China on these issues and we need to see it soon,” NAM president John Engler said.s soon as possible.”

The U.S. is sending a high-level delegation to China next week to make that point as directly as possible, but they are also taking a more moderate position in public.

5. No butts about it: There nothing like standing in front of a room full of people wearing a tuxedo and announcing the Product of the Year Gold Award Winner is %%MDASSML%% Big Ass Fans. That’s what I did at my first POY dinner two years ago, and the room nervously giggled like a room full of third graders.

Big Ass Fans tends to thrive on such attention, and they’re at it again. Their new Website includes a place (I am not making this up) called Big Ass Fan Land . Oh, it’s a time waster, but an entertaining one %%MDASSML%% including something called Flying Fanny.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me