Benchmarking 202: How to learn fast and leapfrog the competition

One key best practice is benchmarking the function or process across different industries—especially companies in fast-moving markets and high competition.

05/13/2016


One key best practice is benchmarking the function or process across different industries—especially companies in fast-moving markets and high competition. Courtesy: Association for Manufacturing Excellence (AME)Benchmarking is a term that's used often today, but is not well-understood by many. If we go back to the first documented book on benchmarking by Robert C. Camp in 1989, when he was at Xerox, he defined it this way: "Benchmarking is the search for best practices that lead to superior performance." Best practice is another term we can define: a practice that works for you.

I had become friends with Bob Camp as he strove to establish the concept and process of benchmarking in North America and, later, in the world. Much like J. Edwards Deming, who was asked to help Japan re-build their industry after World War II, companies worldwide knocked on Camp's door and asked him to help them establish the concept in many of their locations. In the U.S., the Malcolm Baldrige Nation Quality Award, which initially focused on manufacturing companies, expected to see benchmarking as a focus of their applications using comparative data to measure the applicant's pursuit of excellence. If you didn't know the benchmarks and best practices, your evaluation was not scored high.

With this short history, we can proceed to address the best practices of benchmarking developed since 1989. These are the questions a leader must ask:

  • Who is the best at what we do? This is a tough question, because it can be your industry competition or in your specific process but way outside your industry. For Xerox warehousing, Camp found that L.L. Bean, the outdoors company in Maine, used a best practice of segmenting their warehouse to reduce the waste of walking to kit orders. When he suggested a benchmarking visit there, his managers asked, "Why should we go there? They sell canoes and rubber boots, and we are a high-tech company." The answer was that warehouses all have a process even if the products are not the same! They went, they learned, they set goals and they changed. As Benjamin Franklin, U. S. statesman and inventor said, "Who is wise? He that learns from everyone."
  • How well are we doing? What performance measures do you have? What are the benchmark goals?
  • What are our strengths and gaps? Which areas are reaching the goals? These are strengths. Which areas are not reaching goals? These are gaps.
  • How will we close the gaps and share the strengths? Involve management to proceed with changes based on the best practices found in benchmarking.

To compete, we need to learn fast and change fast continually. Here is a quote that is more applicable today than when I recorded it in 1998.

"What makes a company great? Great companies are quick; they're nimble. They are wide open to new ideas and new ways to do things. We need to be externally biased in our benchmarking and search for best practices." -Dan Burnham, chairman and CE0, Raytheon Co.

One key best practice we found was benchmarking the function or process across different industries. It's particularly valuable to benchmark companies that have had to change in fast-moving markets and high competition. You really don't want to benchmark solely in your industry because it really will not be a step function, but could only make you "the best of the dogs!"

For example, to benchmark the "new-product development process," it's best to survey industries that have to move faster than you and people that have had to drastically change to stay on the leading edge. We were able to benchmark with a leading integrated circuit (chip) company, since we knew they had to come out with a smarter, faster chip about every six months. We visited and discussed our process and theirs, since there was no competitive sensitivity, and came back to make some significant changes to our process, which greatly reduced our cycle time.

For me, a unique project was to benchmark "office supplies procurement and distribution within the company." The burning platform was the high cost of supplies and what could we do to better manage them with our multiple sites and facilities. We surveyed some high-tech companies like us and some lower-tech companies that had lots of office personnel. I remember one high-tech company did not provide office supplies: The engineers had to supply their own pencils, pens, tablets and such. We determined that this was not what we wanted to do in our culture, so this practice was recorded but discounted.

A lower-tech company with many employees had seen numerous local stashes of supplies in their organization, because administrators were stockpiling supplies to never run out. The solution was to attack the root case and contract with a local supplier to deliver requested items to the requisitioner's desk the next day, thus eliminating the need to have many stashes of items, even some that were not necessarily needed. We took this best practice back and changed our process. We just had to make sure the next-day delivery worked for all our facilities and became trusted. This was implemented, and we were able to reduce our office supplies ordering and cost greatly.

- Bill Baker is the Target Editorial Board Chairman. This article originally appeared on Association for Manufacturing Excellence. AME is a CFE Media content partner. Edited by Erin Dunne, production coordinator, CFE Media, edunne@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
November 2018
2018 Product of the Year finalists, mild steel welding: finding the right filler, and new technique joins aluminum to steel.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Summer 2018
Microgrids and universities, Steam traps and energy efficiency, Finding help with energy projects
October 2018
Complex upgrades for system integrators; Process control safety and compliance
November 2018
Analytics quantify processes, Fieldbus networking and IIoT, Choosing the right accelerometer

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me