Beijing Motor Show points to booming in-vehicle telematics market in China

The recent 2012 Beijing International Automobile Exhibition will be remembered for beautiful models, enthusiastic audiences, new car model launches; as well as several eye-catching in-vehicle telematics systems.

05/11/2012


The recent 2012 Beijing International Automobile Exhibition will be remembered for beautiful models, enthusiastic audiences, new car model launches; as well as several eye-catching in-vehicle telematics systems such as Ford’s SYNC, Hyundai’s BlueLink and SAIC’s iVoka. According to an ongoing research project named “OE In-Vehicle Telematics - China – 2012”, IMS Research, recently acquired by IHS Inc., points out that the in-vehicle telematics market in China is booming right now, with the next few years being critical for the future development of the market.

Currently there are three main types of telematics system in China: there are standalone telematics systems like GM’s OnStar, embedded telematics systems such as Toyota’s G-Book, and connected telematics systems like Ford’s SYNC. Although connected systems were introduced to the Chinese market most recently, they are forecast to grow more quickly than the other two types, due to their relatively low cost and the bridge they offer to connect smart phones to cars, which younger drivers value highly.

Michael Liu, market analyst with IMS Research’s Automotive and Transport Group comments, “Besides the three major global brands (OnStar, G-Book and SYNC), it is encouraging to see some local Chinese telematics systems popping up. For example, iVoka is actually like the early stage of Apple’s Siri. You can ask it to do things like make hands free calls, send messages, provide navigation, check for weather, or even just talk with you for fun. But the system is far from mature; lots of things need to be improved in the near future. For example, you need to wait for at least 2 seconds before iVoka comes back to any of your inputs. This wait time will be too long for most people, especially young drivers. That said, it’s still a good start and is pointing to the right direction for future development.”

Although in-vehicle telematics seems quite appealing to Chinese consumers, there are some critical factors needed for the market to grow healthily in the future. Finding good and successful business models is an important one. At the moment, the subscriber renewal percentage for OnStar and G-Book is very low, making it hard to be profitable. It is critical for vehicle manufacturers, TSP providers and telecom companies to find the balance amongst themselves so that the whole supply chain benefits.

Another key factor for the future of in-vehicle telematics in China is to provide drivers with truly useful functions that they love to use. Navigation based on real-time traffic information can be one, but there needs to be more. Only when drivers use some functions frequently, will they be willing to pay.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me