Beckhoff Automation increases turnover by 46% to $500 million in 2010

Growth fuels office and production expansion for Beckhoff in Verl, Germany

04/15/2011


By the close of financial year 2010, Beckhoff Automation achieved its strongest sales growth since 1987: the global turnover of approximately $500 million represents impressive growth of 46% compared to the previous year and growth of 24% compared to 2008. 

Beckhoff Automation can look back on an extraordinarily successful financial year. “We have registered pleasingly high growth across all geographic areas and branches of industry. Our existing customers have regained their previous strength and have been joined by new customers and new fields of business,” said Managing Director, Hans Beckhoff. “One of the main growth areas is the Asian market, but we also grew by 45% in North America and Germany last year.” The current growth drivers include alternative energies, which already constitute 20% of total Beckhoff turnover. The company is also optimistic about the current financial year and is expecting an increase in turnover of more than 30% in 2011.

“Our PC Control technology is used in a wide range of industries. PC Control stands for high-performance PLC, motion, control technology and communication software. Beyond that, the convergence of automation and information technology is highly beneficial for many users. The outstanding performance of the CPUs in our PCs makes ultra-fast control technology possible on the basis of eXtreme Fast Control technology (XFC). In addition, Scientific Automation represents the successful integration of engineering science into automation. These beneficial system characteristics are understood and accepted by engineers all over the world. Our international business development is, therefore, considered to be particularly important and will continue to be driven forward intensively. Beckhoff currently has an export share of 50%. We expect this level to increase to between 60 and 70% of total turnover in the coming years,” explained Hans Beckhoff.

In 2010 Beckhoff established further subsidiaries in Israel, Malaysia, Singapore and Japan. The company is presently represented in 62 countries worldwide by 28 subsidiaries and by distributors.

The rapid development of the company in the past year also led to a 26% increase in the number of employees to 1,700 worldwide at the end of 2010. Due to the continuing growth, a further 250 employees were hired by the end of March 2011 alone, so that the current number of employees now stands at 1,950 globally.

Office and production capacities expand at the company’s headquarters in Verl, Germany

The strong growth has made an expansion of Beckhoff production capacities necessary, with new factory buildings and manufacturing machines. The office and production areas at the Verl, Germany headquarters location were expanded by 6,000 sq. meters in 2010. With a total of five new high-speed placement lines, it was possible for Beckhoff to triple production capacities for electronic printed circuit boards and motherboards. The continuous development of the company’s facilities will resume at the end of 2011 with the occupation of an additional 11,000 sq. meter office building and the construction of further new production facilities.

www.beckhoff.com

Beckhoff Automation

- Edited by Gust Gianos, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me