Bad back: Can he refuse a lifting chore?

Maintenance Foreman Foster Perkins wasn't entirely displeased when Utility Worker Vince Borelli refused an order to stack several 40-lb electrical units on a 5-ft-high shelf. "My back's been acting up," Borelli explained.

07/01/1998


Maintenance Foreman Foster Perkins wasn't entirely displeased when Utility Worker Vince Borelli refused an order to stack several 40-lb electrical units on a 5-ft-high shelf.

"My back's been acting up," Borelli explained. "This assignment could get me in trouble."

Perkins didn't believe him. On top of that, Borelli was a marginal worker with a poor attitude at best. Perkins figured, this could be just the opportunity he needed to get rid of him.

"Bad back! That's the most popular excuse I know to get out of work," the foreman replied.

"You don't have to take my word for it; I can get you a note from my doctor. I'm under treatment for my back."

"I don't have time to argue with you," Perkins said. "Either do what you're told, or clock out and take the consequences."

"What consequences?"

"Figure it out for yourself. Failing to follow an order is insubordination. It could cost you your job."

Borelli decided his health was more important than his job. He persisted in his refusal to lift the motors, and clocked out as he had been instructed.

Perkins returned to his desk and typed up a termination notice.

Question : How do you rate Perkins' chances of getting away with firing Borelli for insubordination?

Stryker's decision: When the foreman presented the notice to his boss for approval, Plant Engineer Herman Stryker asked, "What effort did you make to check Borelli's contention that he has a back problem? Did you send him to the nurse?"

"No. I didn't believe him for a minute. He's a lousy worker and lazy in the bargain. Back trouble is the standard excuse some of these guys use to get out of jobs they don't like."

"That may be so in this case. On the other hand, you may be wrong. If Borelli does have a legitimate back problem, his refusal to lift heavy units is reasonable and sensible. Keep in mind too that the quality of his work performance and attitude isn't the issue in this case. Your first responsibility is the safety and well-being of your people. It was your obligation to determine as best you can whether or not Borelli's health claim was valid. If it is, he's not guilty of insubordination. If you wish to fire him for unsatisfactory performance, this must be the basis of your termination notice."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me