Automation service strategy: 5 things to consider

5 tips for developing and documenting a life cycle services strategy

07/24/2013


As the automation workforce ages and nears retirement and as the competitive pressure to “do more with less” accelerates, what does this mean for a plant’s automation service strategy? Manufacturers must continue to be flexible and efficient when automating and servicing their plants. A well-developed and documented life cycle services strategy is core to your success. Where to begin? Consider the following five items. 

1. Scheduled and documented preventive and corrective maintenance is proven to improve system reliability. If you are not already doing so then implement measurement and tracking for Key Performance Indicators (KPIs) related to maintenance and service activities. Identify the important KPIs for your plant and then measure, report and implement improvements based on them. If there are several plant sites, consider standardizing maintenance practices across sites and compare KPIs to drive improvement.

2. Review your plant’s human resource depth and bench strength taking into account not only internal personnel but also what is available from your automation service providers. When you need support, evaluate the responsiveness of your automation vendor and whether they have the depth of technology experts to adequately help implement solutions and solve problems. Test that you can access these experts quickly and efficiently. Make sure that the skills of your staff are up-to-date to support your automation and make sure you have a viable and current personnel succession plan in place.

3. System lifecycle planning, management and total cost of ownership go hand-in-hand. Have plans in place to address obsolescence and review them during each budget cycle. Know what programs and new features are available from your automation service provider to keep your system current. Ask what ROI and risk mitigation you can expect to see from these programs. Be aware of unique vendor programs to extend system hardware life and take advantage of parts repair and refurbishment programs. A careful analysis of system life cycle total cost of ownership may uncover ways to optimize you plant further.

4. Supplement your in-house staff by using qualified outside system and process experts. Experts and expert tools are available to perform high-value tasks such as system health checks, process loop optimization and advanced process control services. These can be performed economically through the use of secure remote connections to efficiently access experts in technical areas. If you do not have a remote connection option for your equipment then it is recommended that you engage your control system vendor and your IT departments to get one implemented for your plant.

5. A cyber security strategy is extremely important to protect the control system from internal and external attacks. In case of a security breach, verify that there is a dependable system backup strategy in place to ensure that your system can be restored quickly. 

The effectiveness of your automation service strategy is an important contributor to your bottom line. A well designed and executed strategy can significantly reduce downtime, off-spec production, costs, and safety issues, while improving overall operational excellence. With forethought, planning and execution, worries about the future can be addressed and minimized.

Andrew Kovach is Regional Director for ABB US Service based in Wickliffe, Ohio. He has been with ABB for 20 years in various roles including project management, engineering operations management and service management.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me