Asia Pacific outpaces Americas in fractional HP sales into medical industry

While America leads fractional horsepower (FHP) motors sold in medical applications, the Asia Pacific region, especially China, is closing the gap because of their growing and aging population.

04/16/2012


The Americas is the largest market for fractional horsepower (FHP) motors sold into medical applications, representing nearly 38% of all FHP motor sales into the medical sector in 2011. While healthcare expenditure in the US is the highest in the world, most of the growth is from services rather than actual equipment. On the other hand, countries in the Asia Pacific region are investing more in medical devices in part due to their aging population. China, for example, is ramping up their healthcare expenditure quickly, and they are investing heavily in upgrading hospitals and clinics to better serve their growing population.

China is expected to build as many as 8,000 new hospitals by 2015 and a total of 20,000 by 2020. The new hospitals and clinics to be constructed in China will require a large number test and measurement devices and pumps, which will sharply increase demand for FHP motors in the region. Thousands of hospitals are already under construction and FHP motor sales into medical applications in the Asia Pacific region are already outpacing sales in the Americas.

There is some uncertainty about how long the robust growth of FHP motor sales into medical applications in China will last. Medical devices in the Asia Pacific region are typically replaced at a much lower rate than those sold in the US, which has traditionally kept FHP motor sales into the medical sector in the Asia Pacific region lower than sales in the US. However, more and more companies manufacturing medical devices for the US market are moving to China, and China’s investment in healthcare will certainly continue through the end of the decade. While no one really can say with certainty that the medical industry will be the next big area of growth for FHP motor manufacturers in the Asia Pacific region in the long run, the medical industry is poised to be a strong outperforming sector through 2016.

FHP motor sales into the medical sector are also thriving in countries like Singapore and the Philippines where there is double-digit growth in medical tourism and increasing domestic consumption of medical services. While much of the growth in the Asia Pacific region is coming from China, it would be foolish not to consider the positive growth in the rest of the region. At the same time that America is hoping to pull resources away from the medical sector, FHP motor suppliers in the Asia Pacific region stand to benefit from increasing medical expenditure in the region. In the long run, the growth of sales into medical applications in Asia Pacific will depend upon the regions acceptance of new medical technologies. The good news is that there are already signs that would suggest that Asia Pacific countries are beginning to do so. 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me