Ariba teams with Kelly Services for temporary labor procurement

11/20/2008


With the prices of core commodities largely out of their control, companies are on the hunt for opportunities to drive savings in other areas to maintain their cost structures and competitive advantage. And one category in which they are finding them is temporary labor.
To help companies quickly convert these opportunities to hard-dollar savings, spend management solutions supplier Ariba reports the launch of a new, network-based offering that will enable companies of all sizes to quickly and easily procure temporary talent across categories leveraging a pre-enabled catalog sponsored by Kelly Services , a world leader in human resources solutions.
"A highly challenging economic environment with increasingly volatile labor markets demands that hiring managers look to temporary labor as a means to stay competitive and flexible,” says Andrew Bartolini, VP of global supply chain management for Boston-based Aberdeen Group. “Companies with the right tools and processes in place to optimize the management of their temporary labor spend will be best positioned to drive productivity and impact the bottom line.”
Delivered as part of Ariba Services Procurement via the Ariba Network, the pre-enabled, temporary labor channel offers flexible and granular visibility into spend, as well as fast access to services across a wide range of temporary labor sub-categories: accounting/finance, contact center, creative services, education, electronic assembly, engineering, health care, IT, legal, light industrial, marketing, office, professional, and scientific.
“Good people are hard to find, but through the power of the Ariba Network, companies can quickly access the talent they need to support their business globally and deliver results,” says Rick Collison, an Ariba director for procurement and content. “Participating suppliers benefit as well through process efficiencies that ultimately enhance their operations.”
Using the temporary labor channel, buyers can perform key actions through a single interface right from their desktops, including:
• Request a resource by creating a detailed purchase requisition outlining job requirements;
• Negotiate value;
• Select a candidate;
• Get approvals for candidate;
• Issue PO;
• Onboard candidate;
• Pay invoices based on timesheets submitted;
• Handle contractor expenses;
• Manage compliance; and
• Report on services spend.
“As budgets continue to shrink and labor markets tighten, it’s critical that companies carefully manage their labor spend and create efficiencies throughout the supply chain,” says John Healy, VP of Enterprise Workforce Solutions, Kelly. “In joining forces with Ariba, we can help organizations locate the best people at the best value faster and more efficiently than ever before.”





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me