ARC: Wireless market to top $1.2 billion by 2012

The market for wireless devices and equipment in process manufacturing will grow to over $1.1 billion in 2012, a growth rate of 32% per year, according to a new ARC Advisory Group study “Wireless in Process Manufacturing Worldwide Outlook.”

05/15/2008


The market for wireless devices and equipment in process manufacturing will grow to over $1.1 billion in 2012, a growth rate of 32% per year, according to a new ARC Advisory Group study “ Wireless in Process Manufacturing Worldwide Outlook ”. The data in this study is from 2007 and includes a forecast of market growth through the year 2012.

The market will also change its character during the period, as new standardized wireless sensing products and hardened wireless local area networks penetrate the process market. Deployment of wireless in continuous process manufacturing industries (such as chemicals, oil and gas, oil refining, electric power, mining and metals) has lagged other manufacturing industries, such as automotive and aerospace, because process plants are often larger and located mainly outdoors, and because the presence of dangerous and potentially explosive materials mandates use of equipment carrying special certifications.

Wireless process sensing is expected to be the fastest growing market segment. Today it accounts for only a small portion of the total market, but according to ARC, it will become the largest segment during the next five years, as the market absorbs a deluge of new wireless sensing products that comply with wireless versions of industrial standards.

Two industrial networking standards, WirelessHART and ISA100 , both use the same sensor radio hardware as the ZigBee standard, but with their own software. The driving force for wireless process sensing is its dramatically lower installation cost, which ARC believes will cause the normal change-averse process industries to use it wherever they can, leading to more rapid adoption.

Wireless LAN use will also grow rapidly, spurred by the introduction of new access point products that can safely be installed in the hazardous environments that may be present in such plants.

“Manufacturers in the process industries know that they need better visibility into operations that occur inside their own fence,” said Harry Forbes, senior analyst at ARC Advisory Group. “ARC’s end user research indicates that manufacturers believe better visibility has huge potential value in the form of more consistent use of best practices, higher plant utilization and improved operational safety.”

For more information on this study, go to: www.arcweb.com/res/wireless .





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me