ARC study: Additive manufacturing creates ‘powerful incentive’

As system speed increases, so will the pace of adoption, study concludes

02/27/2013


The additive manufacturing systems market for industrial applications has made a strong recovery since the recession in 2009. In 2012, the market reached a milestone in overall revenues for machinery and services, as shipments surpassed $1 billion. Furthermore, market dynamics have been robust as acquisitions, channel expansion, and numerous startups are staking a claim in a market that is clearly transitioning through the early adopter stage for industrial manufacturing at a rapid pace, according to a new ARC Advisory Group global market research study. 

The synergy of digital modeling with additive manufacturing is a driving force for adoption in the market that will sustain double digit growth rates over the next five years. Manufacturers seek a competitive advantage with additive manufacturing systems in an effort to overcome hurdles in traditional design processes. The possibilities of designing complex structures, cost effectively, allows manufacturers to envisage concept designs previously cost prohibitive due to development constraints. 

“Due to the geometric freedom the technology affords and the absence of a penalty for designing more complex parts, additive manufacturing should create a powerful incentive for innovation,” according to research analyst Scott Evans, the principal author of ARC’s “Additive Manufacturing Systems Global Market Research Study."

While most additive technologies using plastic build materials have existed for several decades, the development of additive manufacturing systems with the ability to fabricate metal parts and objects is an exciting new development. Many industries are attracted to valuable metals, such as titanium, as build materials. That material is built up rather than cut away creates tremendous savings in materials costs.

The ability to actualize complex digital designs opens up new possibilities for industrial design. It is now easier to create representations of entire systems, creating value throughout the entire design phase. Because of the unrestricted geometric freedom the technology affords, additive’s advantage is not only restricted to how it will streamline the current product design phase, but how it introduce designs not even considered yet. 

However, while both metal and plastic build materials have the potential to enhance production and even open up new design possibilities, they also come with a number of limitations. Most systems are still too slow to justify producing anything but the most complicated designs. Unless the fabricated object is of tremendous value and complexity, there is likely no economic justification to switch to additive. 

With all major suppliers currently residing in the United States, Western Europe, and Israel, additive manufacturing’s customer base is mostly local to these areas. But additive manufacturing will increase its global appeal with the continued emergence in Latin America and Asia. In particular, ARC expects the impending commercialization of additive technologies currently in the research stages, many of which are developed at Chinese universities. Additive manufacturing will transition from a regional to a global technology.

More information on this study.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me