ARC President: Pick up the pace of technology adoption

Rapid growth of devices, technology use requires faster implementation on plant floor

03/29/2013


ARC Advisory Group President Andy Chatha is advocating increased awareness and devotion to manufacturing information adoption. Courtesy: ARC Advisory GroupThe speed of manufacturing information adoption is accelerating, and those who stay on the sidelines will find themselves falling farther and farther behind a fully optimized plant.

That was the keynote message from ARC Advisory Group president Andy Chatha at the 2013 ARC Forum in Orlando Feb. 12. “All of you have data, gathering information in real time. The challenge is that we haven’t had good tools to analyze that data,” Chatha told more than 600 attendees at the ARC event. “Now we do have powerful analytical tools. We think information-driven manufacturing is the way to leverage the information. You have to be able to make sense out of the information.”

Chatha noted that the accelerated use of smart devices, the pervasive influences of Wi-Fi and cloud computing, and the connective nature of devices all have created enormous opportunities to leverage the data now available on the plant floor.

“It’s much easier now to get devices connected and add intelligence,” Chatha said. “In my view, one thing that is happening is that the cost of adding intelligence is coming way down. Companies should be adding intelligence to all equipment. Data should be moving toward some sort of cloud.”

But the key for manufacturing to take advantage of this technology is speed, and Chatha noted manufacturing is slow to embrace speed.

“Technology constantly is changing. Most manufacturing companies are very conservative. They only employ technology when it has been well-proven,” he said. “That strategy worked fine in the past. New technologies are more disruptive, and they are moving faster. Now you have to start testing technologies faster. If you are not testing technologies, it may take you too long to catch up. You’ve got to start moving a little faster to develop new technologies.”

Chatha sees a continuing evolution of plant floor processes. “With powerful tools, you can look at all processes in the plant and information outside the plant—in your supply chain, for example,” Chatha said. “Look at how analyzing much larger amounts of information can optimize the performance of the plant.”

Developing such a plan will require new relationships from existing suppliers. “The automation business already is moving toward being more of a service business,” Chatha said. “One model is looking at signing some sort of performance-based service agreement with suppliers, based on key metrics. Systems are becoming more complex, and it is more difficult for manufacturers to upgrade them and manage them.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me