Apprion’s Lambright discusses wireless issues, new system

Next generation ION system addresses security reliability and scalability in large process manufacturing plant wireless network applications.


Moffett Field, CA-based Apprion released the next generation of its ION system for industrial application networking. Apprion provides wireless application network systems and services designed for oil and gas, chemical and power/utilities.
Stephen Lambright, Apprion’s president and CEO said this release of the ION industrial wireless application networking system is built from the ground-up as “the first truly open, scalable and extensible foundation for managing multi-vendor wireless devices and applications.” It has improved security, management and integration capabilities to meet the challenges of the evolving process manufacturing environment, he said.
The updated system consists of Apprion IONosphere and IONizers. The IONosphere is an on-site controller design to automatically bring devices, systems and applications under management %%MDASSML%% ensuring improved network performance, security and reliability %%MDASSML%% regardless of the wireless vendor. IONizers are designed to integrate and secure previously disparate wireless-enabled applications such as VoIP and condition monitoring.
While the basic building blocks for a wirelessly connected plant exist today, wireless systems have remained fragmented, proprietary and difficult to integrate, making it difficult to realize the full potential of wireless in an industrial setting. “It’s not just about the DCS; it’s not just about the controls,” said Lambright. “It’s about all the other operational systems that occur within the facility that are as important as the DCS environment is. They are not part of the DCS, and yet they almost inevitably require some form of wireless technology. But there are challenges around the implementation of those applications.”
The initial design goal behind Apprion was to put a common infrastructure in place that was interoperable, giving customers freedom of choice use the best tool for the job, with the premise that no one size will fit all when it comes to wireless technologies. “Customers are going to want to %%MDASSML%% almost as a visceral reaction to the bus wars %%MDASSML%% be able to not be stuck with one vendor,” said Lambright, “but be able to choose the vendor of choice, depending on the application, technology or the criteria they were going to use, be able to plug-and-play that into one common infrastructure that they could take to IT and have it IT-blessed because it was secure; it was manageable; and it spoke by all the rules that IT has created around their security architecture.”
Initially, security was a barrier to wide implementation of wireless technologies. “As you know, one of the issues around wireless was as soon as someone brought it up, IT would shut it down because it would open a hole in their beautifully architected fortress that they created around their networks,” Lambright said. “What we’ve done is basically taken the best practices that IT has implemented in the last 10-15 years, and applied them to the specific needs, issues, concerns and criteria of the process world.”
However, as we hopefully near adoption of standards, wireless technologies are gaining ground. “You see more and more interest in wireless, and more people coming up with solutions around wireless, and being able to tell their story,” said Lambright. “Apprion’s story is:‘It’s all good. We’ll help you go through the technology selection criteria, or you can choose yourself and tell us how you want to do it.’ What we provide is that layer of management and integration around, not just the network, but the applications; and be able to guarantee that there’s reliability, security, manageability and scalability of these infrastructures %%MDASSML%% that you can go forward with confidence that you’re not going to get stuck in a box with old technology that you can’t rely upon.”

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me