Analyzing Stuxnet with Siemens

Two security experts at the 2011 Siemens Automation Summit talked about lessons learned during the Stuxnet affair.

07/12/2011


ISS SourceThey walked into the Lion’s Den and came out unscathed. Two security experts went into the 2011 Siemens Automation Summit and talked about lessons learned during the Stuxnet affair.

Joel Langill, chief security officer at SCADAHacker, and Eric Byres, chief technology officer at Byres Security, gave a talk Tuesday at the 2011 Siemens Automation Summit entitled “How Stuxnet spreads: A study of infection paths in best practice systems."

“Stuxnet was a well engineered worm,” Byres said. “This attack could have happened to any one of the vendors. It just happened the Iranian nuclear site was running Siemens products. Siemens was the bystander shot in the middle of the gunfire.”

As a result of his highly complex and impressive piece of software, security professionals will be studying Stuxnet for years to come.

“Stuxnet is dead and gone,” Byres said. “Why study Stuxnet? Because the bad guys learned a lot from Stuxnet and we have to do the same. How do I protect a client from the son of Stuxnet?”

When you really look at it, the worm was very clean software. “It was amazingly well written software, Byres said. “It was a better grade of software than what is installed in most commercial systems.”

The big news when the world first became aware of Stuxnet was people believed the worm entered control systems via a USB key. While that may have happened, it doesn’t seem right that users would ban the use of USB drives. They do serve a quality purpose.

“Don’t think of this as a USB problem,” Langill said. “It was a removable media problem.” One of the things you have to remember, Langill said, is this was not an Internet-based attack. Instead, this all happened on the local area network.

The worm did infect some 100,000 computers and infected at least 22 manufacturing sites, which Byres actually believes was more around the 50 number.

One of the shocking thoughts about Stuxnet was the worm was able to penetrate and damage a nuclear site, which has some of the toughest security in any industry. What happens, Byres asked, when another worm comes around and takes over a less secure environment?

The odd part of the entire attack was Siemens does have a solid layered security architecture in the systems targeted for attack.

As mentioned the attack could have happened on a USB stick, however it could also have come as a result of infected project files, transmitted in an email, an infected laptop among other possibilities.

“If someone wants to put a virus on your site, they will be able to,” Byres said. “It depends on what you do with that afterward is what is important. There was so many ways it could spread.”

Some of the things the industry learned from Stuxnet was modern industrial control systems or SCADA systems are highly complex and interconnected; there are multiple pathways; you have to assume an air gap is unrealistic; focusing security on specific obvious pathways is not a good idea, and users have to complete a simple overall holistic view of the system, Byres said.

- Edited by Amanda McLeman, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me