AMT chairman: Take a long-term view when looking at small business loans

Obama's proposal for SBA loans a good step, but more is needed

03/23/2009


By the Obama Administration’s estimate, 70% of net new jobs in the last decade were created by small business. With an increasing number of those businesses drowning in the economic tsunami, a lifeline to stimulate lending could be a crucial component leading to recovery. The President’s plan to boost financial backing for small business lending, particularly loans made through the Small Business Administration (SBA), is a commendable step toward that revitalization.

However, more must be done, and be done immediately, to save these businesses and the American workers they employ. Beyond just the added financial backing, relaxing eligibility requirements for SBA 7(a) loans is another important action that policymakers should consider to get small business back on track.

America’s small manufacturers, the lifeblood of our economy, have been particularly hard hit in the current economic downturn. Preliminary data from the Bureau of Labor Statistics indicates that 168,000 manufacturing jobs were lost in February alone, with the biggest losses coming in metals fabrication (28,000 jobs lost) and machining (25,000 jobs lost). Underlying those overall losses is the small but critical machine tool industry, which supplies the manufacturing technology necessary for producing virtually all manufactured products.

Factories could not be modernized, new sources of energy could not be developed and advanced technology vehicles could not be produced without ongoing innovations in this field. Most importantly, the industry is also significant to protecting our national security.

These small manufacturing businesses are historically strong but don’t have the resources to weather the storm without help. If SBA preferred lenders take into account only the past few months’ business performance — as current policy requires — most of these businesses would fail by any credit test. Lenders should instead examine the longer-term financial history of a company when making decisions about whether to approve a loan.

The Association For Manufacturing Technology, which represents America’s manufacturers of next-generation manufacturing technology, recently surveyed its members about how their businesses have been affected by the credit crisis. The results showed that three-quarters of the respondents believe that credit has tightened over the last six months, and as a result more than one-half have altered the way they do business. Additionally, most report that banks have changed their terms of credit, and almost 60% of the respondents are or have considered self-financing.It is not an environment that encourages innovation nor is it conducive to global competitiveness.In fact, it is threatening the very survival of these companies.If something is not done immediately and directly, they may not be in business tomorrow.

That is evident from the comments which accompanied many of the survey responses. They paint a bleak picture of desperation — and showed why measures aimed at restarting small business lending are so urgently needed.

“Capital investment in machine tools and equipment has completely stopped,” exclaims an automation equipment manufacturer in Fenton, MI. “Not slowed down, but stopped. Zero orders.”

“Time is not on our side,” laments another AMT member in Westchester, IL. “We are desperately searching for a buyer and/or new financing. It seems to me the bank wants to get as much as they can as quickly as they can to satisfy their own agenda.”

AMT members from across the nation weighed in on the harsh realities of their businesses and told stories of jobs about to be lost or already gone, decades-old family businesses shutting down for good, financial fortunes ruined and entrepreneurial dreams dashed. Help is needed urgently to ensure that the once-bright future of our small yet vital manufacturing technology sector is not just a distant memory.

President Obama’s plan to help small business is a good first step toward solving the problem, and it is greatly appreciated. But as the SBA works to implement the plan, it needs to take into account the longer term financial history of the businesses that it is attempting to help, in addition to their assets and order backlog. Such a view would reveal the historical strength of machine tool companies and allow approval and support for companies that desperately need it to weather the current credit crisis.

 

Ronald Schildge

Chairman of the Board

The Association For Manufacturing Technology





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me