Americas region remains leader in industrial chip purchases, emerging countries gain ground

Led by the U.S., OEMs in the Americas region accounted for 36.3% of global spending on industrial semiconductors in 2012, according to a report from IHS Inc.

12/19/2013


Global OEM spending forecast on industrial semiconductors by region. Source: IHS Inc., November 2013Despite years of outsourcing and offshoring, the Americas region continues to lead the world in terms of spending on semiconductors for industrial electronics, although emerging economies are gaining share.

Led by the U.S., original equipment manufacturers (OEMs) in the Americas region accounted for 36.3% of global spending on industrial semiconductors in 2012, according to the Industrial Electronics Market Tracker report from IHS Inc. By 2017, the region’s share will decline by nearly one percentage point to 35.5%, as presented in the attached figure. Despite the decrease, the region will continue to lead the world in industrial semiconductor purchases.

Other established regions—Europe-Middle East-Africa (EMEA) and Japan—also are expected to see their share decline.

Meanwhile, China, including the Hong Kong region, will emerge as a powerful new force by enlarging its portion of the OEM spend market to 15.7%, up from 12.9%, or a gain of 2.8 percentage points. The rest of Asia-Pacific excluding China and Japan will also enjoy good growth, expanding its market allocation to 11.3%, up from 9.4%, or an increase of 1.9 percentage points.

“Although China has surpassed the United States as the world’s largest manufacturing country, the U.S. continues to lead in advanced production technologies,” said Robbie Galoso, principal analyst, electronics, for IHS. “Because of this, the Americas region continues to lead in the purchase of semiconductors used for industrial applications. However, as manufacturing technology advances in emerging regions, chip spending is shifting away from traditional strongholds with mature economies.”

The semiconductors covered by the industrial electronics space encompass a broad range of markets. They include including building and home control, energy generation and distribution, manufacturing and process automation, medical electronics, military and civil aerospace, and test and measurement.

Made in the USA

Looking specifically at the U.S., the country continued to be the No.1 purchaser of industrial chips among all countries, with a 31.6% share of shipments in 2012. However, the U.S. share in 2012 was down one-tenth of a percentage point from 31.7% in 2011.

Among the world’s top brands that make the U.S. their home are General Electric in lighting and metering, Honeywell in building and home control, Halliburton in energy, Johnson & Johnson in medical, Boeing and Raytheon in aerospace, and Agilent in test and measurement.

For its part, the EMEA region—powered by Europe as the principal player in the triumvirate—will see its share decline to 29.3%, down from 30.4% or a contraction of 1.1 percentage points. Japan will suffer the largest decrease in OEM spend market share, falling to 8.2%, down from 11.0%, or a 2.8 percentage point decrease.

China’s chips

When ranking individual nations, China was the world’s second-largest purchaser in 2012. Among the brands based in China with major spending power on industrial chips are Dahua, Ningbo Water Meter and Midea. Also, several global brands have significant design locations in China, including Siemens and ABB in manufacturing and process automation, as well as GE Healthcare in medical electronics.

Japan continues to be the third power of note in the market, even though its portion of OEM spending is down from 11.5%. Notable industrial OEMs based in Japan include Panasonic, Mitsubishi, Toshiba and Hitachi.

At No. 4 among the world’s major industrial chip buyers was Germany with a 9.7% market share, up from 9.6%.

Germany is home to leading OEMs like Bosch, Thyssenkrup, Osram, Siemens and Hauser.

In fifth place is France with 5.7% share, down from 6.0%. Major industrial-based French OEMs include Schneider Electric, Thales, Alstom and pan-European aircraft manufacturer EADS.

Rounding out the Top 10 in the 2012 rankings were Switzerland in sixth place, Taiwan in seventh, India in eighth, Canada in ninth and South Korea in 10th. Sitting just below the Top 10, in 11th place, was the United Kingdom.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me