AME names four to 2012 Hall of Fame class

Honorees have diverse talents and skills, a common commitment to excellence.

10/25/2012


The Association of Manufacturing Excellence named four 2012 Hall of Fame inductees at its annual conference this week. In a ceremony held at its annual Internal Excellence Inside Conference, the honor recognizes individuals who have distinguished themselves in the manufacturing community in a manner that is consistent with AME’s mission to inspire a commitment to enterprise excellence through shared learning and access to best practices. This year’s honorees are:

Daniel Ariens, president and CEO of the Ariens Company. Ariens has been a strong proponent of lean manufacturing principles, even when the company was experiencing a downturn as a result of weather-related problems. He created a culture of continuous improvement that has resulted in the creation of world-class manufacturing facilities by lean standards.

Dr. Patricia Gabow, M.D., CEO of Denver Health. Under her direction, Denver Health has experienced a financial benefit of more than $135 million through improvement actions. Most importantly, it has transformed the health system and delivery quality for the patients it serves. Dr. Gabow attributes this lean health care initiative to saving at least 213 lives in 2011 alone.

Dr. Jeffrey Liker, PhD., professor of industrial and operations engineering at the University of Michigan and principle of Optiprise, Inc. Dr. Liker has authored or co-authored over 70 articles and book chapters and eight books. He is author of the international best-seller, The Toyota Way: 14 Management Principles from the World’s Greatest Manufacturer.

Dr. John Toussaint, M.D., CEO emeritus of ThedaCare and CEO of the ThedaCare Center for Heathcare Value. During his tenure at ThedaCare, Dr. Toussaint applied the Toyota Production System to health care, which led to such results as zero medication reconciliation errors upon admission for more than three years in a row and dramatically improved staff productivity and satisfaction. Millions of dollars of waste reduction have resulted in ThedaCare consistently being one of the lowest-priced health care organizations in Wisconsin, while at the same time more than doubling operating income over five years.

“Our Awards and Hall of Fame council members work hard every year to honor the individuals who really are our industry’s thought leaders, those that take pride in their ability to influence positive change and encourage the adoption of continuous improvement practices, said AME president Paul Kuchuris. “I think this year is no different as we have four very talented and skilled people entering our Hall of Fame.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me